Tripp Lite B162-100-POE Owner's Manual

Loading ...

8.3 Panel Controls

1. Tx/Rx LEDs – Indicate whether the displayed ID number is for the transmitter or receiver.

2. ID Number:

o Transmitter: Identiﬁes its ID number.

o Receiver:

- Identiﬁes its ID number or the transmitter’s ID number when the panel control is switched to Tx.

- If the ID number exceeds 3 digits, letter A, b, c, d, E and F are used to replace the ﬁrst 2 digits:

• A= 10, A00 ~ A99 to display ID number 1000 ~ 1099

• B= 11, b00 ~ b99 to display ID number 1100 ~ 1199

• C= 12, c00 ~ c99 to display ID number 1200 ~ 1299

• D= 13, d00 ~ d99 to display ID number 1300 ~ 1399

• E= 14, E00 ~ E99 to display ID number 1400 ~ 1499

• F= 15, F00 ~ F99 to display ID number 1500 ~ 1599

o ID Number blinks to indicate it is being used by another B162 device.

3. Up (+)/Down (-) Buttons:

a. Assign ID numbers on the devices.

b. Assign the source video (transmitter) for the receiver.

4. Tx/Rx Switch Button – Press to switch control between a receiver and its corresponding transmitter.

Notes:

• The B162 unit automatically locks its panel when it idles for 1 minute. To unlock, press and hold the Down button

for 3 seconds.

• Tx/Rx LEDs and Tx/Rx Switch button are available only on B162-100-POE receivers.

8. Panel Operation

ID NUMBE

POWER

LINK

4K HDMI Over IP Extender with POE

B162-001-POE

Transmitter

ID NUM BER

Tx / Rx

4K HDMI Over IP Extender with POE

B162-100-POE

Receiver

2 321 3 4

Loading ...

Tripp Lite B162-100-POE HDMI over IP Decoder - 4K, 444, PoE, 328 ft. 100 m