Loading ...
Loading ...
Loading ...
PETROL WOOD CHIPPER
HYCH700/HYCH1400
WARNING
Read all safety warnings and instructions. Failure to follow the
warnings and instructions on the machine may result in fire and/or
serious injury to yourself. Save all warnings and instructions for future
reference.
SAFETY WARNINGS
When using the machine, always observe the enclosed safety
warnings as well as the additional safety warnings.
The following symbols are used throughout this manual:
Denotes risk of personal injury or damage to the machine
DANGER
Indicates a hazard, which if not avoided, could result in serious injury
or death.
WARNING
Indicates a hazard, which if not avoided, could result in serious injury.
CAUTION
Indicates a hazard, which if not avoided, might result in minor or
moderate injury.
NOTE
Indicates a situation that could easily result in equipment damage.
PACKAGE CONTENTS
HYCH700/HYCH1400 PETROL WOOD CHIPPER
Petrol Wood Chipper
1x Feed Hopper
1x Handle
2x Rear Wheel Support
2x Tyres
1x Front Support Leg
1x Discharge Chute
1x Wheel Axle
Tool Kit
SAFETY INSTRUCTIONS FOR PETROL WOOD
CHIPPERS & SHREDDERS
NOTE: READ THROUGH THE ENTIRE MANUAL BEFORE
STARTING ANY POWER PRODUCT.
Machinery presents serious injury hazards to untrained users.
• ALWAYS USE SAFETY GLASSES WHEN OPERATING
MACHINERY: Everyday eyeglasses only have impact resistant
lenses, they are NOT safety glasses.
• ALWAYS WEAR A RESPIRATOR WHEN OPERATING
MACHINERY THAT PRODUCES DUST: Wood dust is a
carcinogen and can cause cancer and severe respiratory
illnesses.
• ALWAYS USE HEARING PROTECTION WHEN OPERATING
MACHINERY: Machinery noise can cause permanent hearing
damage.
• WEAR PROPER APPAREL: DO NOT wear loose clothing,
gloves, neckties, rings, or jewellery which may get caught in
moving parts. Wear protective hair covering to contain long hair
and non-slip footwear.
• NEVER OPERATE MACHINERY WHEN TIRED, OR UNDER
THE INFLUENCE OF DRUGS OR ALCOHOL: Be alert at all
times when running machinery at all times.
• ONLY ALLOW TRAINED AND PROPERLY SUPERVISED
PERSONNEL TO OPERATE MACHINERY: Make sure
operation instructions are safe and clearly understood.
• KEEP CHILDREN AND VISITORS AWAY: Keep all children
and visitors a safe distance from the work area.
• MAKE WORKSHOP CHILD PROOF: Use padlocks, master
switches, and remove machinery keys.
• NEVER LEAVE WHILE THE MACHINE IS RUNNING: Turn
power OFF and allow all moving parts to come to a complete
stop before leaving machine unattended.
• DO NOT USE IN DANGEROUS ENVIRONMENTS: DO NOT
use machinery in damp, wet locations, or where any flammable
or noxious fumes may exist.
• KEEP WORK AREA CLEAN AND WELL LIT: Clutter and dark
shadows may cause accidents.
• USE A GROUNDED EXTENSION CORD RATED FOR THE
MACHINE AMPERAGE: Undersized cords overheat and lose
power. Replace extension cords if they become damaged.
DO NOT use extension cords for 220V machinery.
• ALWAYS DISCONNECT FROM POWER SOURCE BEFORE
SERVICING MACHINERY: Make sure switch is in the OFF
position before reconnecting.
• MAINTAIN MACHINERY WITH CARE: Keep blades sharp and
clean for best and safest performance. Follow instructions for
lubricating and changing accessories.
• MAKE SURE GUARDS ARE IN PLACE AND WORK
CORRECTLY BEFORE USING MACHINERY.
• CHECK FOR DAMAGED PARTS BEFORE USING
MACHINERY: Check for binding and alignment of parts, broken
parts, part mounting, loose bolts, and any other conditions that
may affect machine operation. Repair or replace damaged parts.
• DO NOT FORCE MACHINERY: Work at the speed for which the
machine or accessory was designed.
4
Loading ...
Loading ...
Loading ...