Loading ...
Loading ...
Loading ...
68
69
HARNESS INSTALLATION
HARNESS INSTALLATION
INSTALL USING LAP BELT ONLY
5a
5b
6
While pushing down on the Child Restraint (5a) pull the loose end of
the vehicle lap belt (5b) to tighten.
Locate Tether anchor in your vehicle. Attach Tether Hook. Pull Tether
Adjuster strap to tighten.
6
5
CHECK YOUR WORK
Hold Child Restraint at each side near FORWARD-FACING vehicle belt path. Pull
side to side and forward. Vehicle belt should remain tight and Child Restraint
should not move more than 1” (25 mm) from vehicle seat back or side-to-side.
Make sure Bubble is between lines on label. If necessary, loosen the vehicle belt
and Tether, re-adjust recline and repeat installation steps to make sure Child
Restraint is installed properly.
Check installation before every use!
INSTALL USING LAP BELT ONLY
Loading ...
Loading ...
Loading ...