Loading ...
Loading ...
Loading ...
56
57
HARNESS INSTALLATION
HARNESS INSTALLATION
8
INSTALL USING LATCH
CHECK YOUR WORK
Hold Child Restraint at each side near forward-facing vehicle belt path. Pull side
to side and forward. Child Restraint should not move more than 1” (25 mm)
from vehicle seat back or side-to-side.
Make sure Bubble is between lines on label. If necessary, loosen the LATCH and
Tether Straps, re-adjust recline and repeat installation steps to make sure Child
Restraint is installed properly.
Check installation before every use!
While pushing down on the Child Restraint (7a), pull on the LATCH
Adjuster strap to tighten (7b).
Locate Tether anchor in your vehicle. Attach Tether Hook and pull Tether
Adjuster strap to tighten.
7
INSTALL USING LATCH
7a
8
7b
Loading ...
Loading ...
Loading ...