1. Home
  2. BRITAX
  3. BRITAX E1C269H User Manual

BRITAX E1C269H Skyline 2-stage Belt-positioning Booster Car Seat, Dusk Highback And Backless Seat

Product's Documents

Below are documents related to this product, you can read online or download:
Main documentSpecificationQuestions and answersRelateds Products
E1C269H photo

More photos

User Guide

This is the main product document for model E1C269H.

The file format is pdf, 118 pages, you can download this manual here .

background
IS0154E_05
Harness+Booster
User Guide
For future use,
STORE USER GUIDE in
compartment at front of base.
©2017 Artsana USA, Inc.
www.chiccousa.com
background
TABLE OF CONTENTS
Registration and Recall 2
Child Guidelines 4
Safe Use Checklist 6
Important Warnings 8
Best Practices 14
Need Help? 15
Child Restraint Components 16
LATCH and Tether Storage 20
Selecting Harness/Booster Mode 22
Adjusting Crotch Strap 26
Adjusting Headrest 28
Adjusting Recline 30
Cup Holder 32
Vehicle Seating Positions 34
Vehicle Seat Belts Harness Mode 36
Vehicle Seat Belts Booster Mode 38
What is LATCH? 40
What is a Tether? 42
Harness Setup 44
Install Using LATCH 50
Install Using LAP-SHOULDER BELT 58
Install Using LAP BELT ONLY 64
Securing Child with Harness 70
Secure Child Harness Checklist 82
Booster Setup 84
Booster Install 96
Securing Child in Booster 102
Convert to Harness Mode 108
Secure Child Booster Checklist 110
Installation on an Aircraft 112
Cleaning and Maintenance 114
CHILD RESTRAINT OVERVIEW
ADDITIONAL INFORMATION
If you have any problems with your Chicco Child Restraint,
or any questions regarding installation or use, please call:
Chicco Customer Service
1-877-424-4226
Please have Model and Serial Number available when you call.
These are located on a label on the bottom of the Child Restraint.
For future reference, fill in the information below. The information can be found on the label
on the bottom of the Child Restraint.
Model Number:
Serial Number:
Manufactured In:
HARNESS MODE
BOOSTER MODE
VEHICLE INFORMATION
background
TABLE OF CONTENTS
Registration and Recall 2
Child Guidelines 4
Safe Use Checklist 6
Important Warnings 8
Best Practices 14
Need Help? 15
Child Restraint Components 16
LATCH and Tether Storage 20
Selecting Harness/Booster Mode 22
Adjusting Crotch Strap 26
Adjusting Headrest 28
Adjusting Recline 30
Cup Holder 32
Vehicle Seating Positions 34
Vehicle Seat Belts Harness Mode 36
Vehicle Seat Belts Booster Mode 38
What is LATCH? 40
What is a Tether? 42
Harness Setup 44
Install Using LATCH 50
Install Using LAP-SHOULDER BELT 58
Install Using LAP BELT ONLY 64
Securing Child with Harness 70
Secure Child Harness Checklist 82
Booster Setup 84
Booster Install 96
Securing Child in Booster 102
Convert to Harness Mode 108
Secure Child Booster Checklist 110
Installation on an Aircraft 112
Cleaning and Maintenance 114
CHILD RESTRAINT OVERVIEW
ADDITIONAL INFORMATION
If you have any problems with your Chicco Child Restraint,
or any questions regarding installation or use, please call:
Chicco Customer Service
1-877-424-4226
Please have Model and Serial Number available when you call.
These are located on a label on the bottom of the Child Restraint.
For future reference, fill in the information below. The information can be found on the label
on the bottom of the Child Restraint.
Model Number:
Serial Number:
Manufactured In:
HARNESS MODE
BOOSTER MODE
VEHICLE INFORMATION
background
2
3
REGISTRATION AND RECALL REGISTRATION AND RECALL
Please complete the Registration Card that came with
your Child Restraint and mail it promptly.
Child Restraints could be recalled for safety reasons. You must register this restraint to be reached in
a recall. Send your name, address, e-mail address if available, and the restraint’s model number and
manufacturing date to:
Artsana USA, Inc.
1826 William Penn Way
Lancaster, PA 17601
or call 1-877-424-4226
or register online at http://www.chiccousa.com/carseatregistration.aspx
For recall information, call the U.S. Government’s Vehicle Safety Hotline at
1-888-327-4236 (TTY: 1-800-424-9153), or go to http://www.NHTSA.gov.
PAGE INTENTIONALLY LEFT BLANK
background
2
3
REGISTRATION AND RECALL REGISTRATION AND RECALL
Please complete the Registration Card that came with
your Child Restraint and mail it promptly.
Child Restraints could be recalled for safety reasons. You must register this restraint to be reached in
a recall. Send your name, address, e-mail address if available, and the restraint’s model number and
manufacturing date to:
Artsana USA, Inc.
1826 William Penn Way
Lancaster, PA 17601
or call 1-877-424-4226
or register online at http://www.chiccousa.com/carseatregistration.aspx
For recall information, call the U.S. Government’s Vehicle Safety Hotline at
1-888-327-4236 (TTY: 1-800-424-9153), or go to http://www.NHTSA.gov.
PAGE INTENTIONALLY LEFT BLANK
background
4
5
HARNESS MODE is designed for children who are at least 2 years old.
ONLY use this Child Restraint if the child meets BOTH of the following
Weight and Height requirements:
• Weight is between 25 and 65 pounds (11.3 and 29.4 kg).
• Height is 54 inches (137.1 cm) tall or less.
BOOSTER MODE is designed for children who are at least 4 years old.
ONLY use this Child Restraint if the child meets ALL of the following
requirements:
• Weight is between 40 and 100 pounds (18.1 and 45.3 kg).
• Height is between 38 to 57 inches (97 - 145 cm).
• Demonstrates an ability to sit relatively still and properly in
a seat belt at all times.
CHILD GUIDELINES CHILD GUIDELINES
Select
Forward -Facing
HARNESS on page 22.
Select
Forward-Facing
BOOSTER on page 24.
BOOSTER MODE
HARNESS MODE
25 lbs. 30 lbs. 40 lbs. 65 lbs. 100 lbs.
(11.3 kg) (14 kg) (18.1 kg) (29.4 kg) (45.3 kg)
NO LATCH
background
4
5
HARNESS MODE is designed for children who are at least 2 years old.
ONLY use this Child Restraint if the child meets BOTH of the following
Weight and Height requirements:
• Weight is between 25 and 65 pounds (11.3 and 29.4 kg).
• Height is 54 inches (137.1 cm) tall or less.
BOOSTER MODE is designed for children who are at least 4 years old.
ONLY use this Child Restraint if the child meets ALL of the following
requirements:
• Weight is between 40 and 100 pounds (18.1 and 45.3 kg).
• Height is between 38 to 57 inches (97 - 145 cm).
• Demonstrates an ability to sit relatively still and properly in
a seat belt at all times.
CHILD GUIDELINES CHILD GUIDELINES
Select
Forward -Facing
HARNESS on page 22.
Select
Forward-Facing
BOOSTER on page 24.
BOOSTER MODE
HARNESS MODE
25 lbs. 30 lbs. 40 lbs. 65 lbs. 100 lbs.
(11.3 kg) (14 kg) (18.1 kg) (29.4 kg) (45.3 kg)
NO LATCH
background
6
7
Make sure your child meets the age, weight, and height requirements:
Refer to the “Child Guidelines” section on page 4.
Choose the proper Child Restraint configuration:
Select a safe seating location in your car:
SAFE USE CHECKLIST
YOUR CHILD’S SAFETY DEPENDS ON YOU! You MUST follow the
detailed instructions in this User Guide to ensure the steps below are
performed correctly!
Ensure that the Child Restraint is properly leveled when installed:
Check for a snug fit in your car when using in HARNESS MODE :
While holding Child Restraint near belt path used, pull side to side and forward.
Belt should remain tight and Child Restraint should not move more than
1” (25 mm) from vehicle seat back or side-to-side.
Secure your child:
SAFE USE CHECKLIST
HARNESS MODE requirements on page 23
BOOSTER MODE requirements on page 25
HARNESS MODE requirements on page 48
BOOSTER MODE requirements on page 98
HARNESS MODE requirements on page 35
BOOSTER MODE requirements on page 35
HARNESS MODE requirements on page 70
BOOSTER MODE requirements on page 102
background
6
7
Make sure your child meets the age, weight, and height requirements:
Refer to the “Child Guidelines” section on page 4.
Choose the proper Child Restraint configuration:
Select a safe seating location in your car:
SAFE USE CHECKLIST
YOUR CHILD’S SAFETY DEPENDS ON YOU! You MUST follow the
detailed instructions in this User Guide to ensure the steps below are
performed correctly!
Ensure that the Child Restraint is properly leveled when installed:
Check for a snug fit in your car when using in HARNESS MODE :
While holding Child Restraint near belt path used, pull side to side and forward.
Belt should remain tight and Child Restraint should not move more than
1” (25 mm) from vehicle seat back or side-to-side.
Secure your child:
SAFE USE CHECKLIST
HARNESS MODE requirements on page 23
BOOSTER MODE requirements on page 25
HARNESS MODE requirements on page 48
BOOSTER MODE requirements on page 98
HARNESS MODE requirements on page 35
BOOSTER MODE requirements on page 35
HARNESS MODE requirements on page 70
BOOSTER MODE requirements on page 102
background
8
9
IMPORTANT WARNINGS
FAILURE TO FOLLOW THESE INSTRUCTIONS AND THE PRODUCT
LABELS CAN RESULT IN SERIOUS INJURY OR DEATH TO YOUR CHILD.
Take Time to Read This User Guide
• Carefully read and understand all instructions and warnings in this User Guide. Your child’s safety depends
on you knowing how to setup, install and use this Child Restraint properly.
• Before installing this Child Restraint in a vehicle, be sure to also check the vehicle owner’s manual for
information on proper installation.
• NEVER allow others to use this Child Restraint until they have read and understood all instructions in this
User Guide.
• This Child Restraint is not intended for use outside of the vehicle.
WARNING
DEATH or SERIOUS INJURY CAN OCCUR
IMPORTANT WARNINGS
WARNING
DEATH or SERIOUS INJURY CAN OCCUR
Make Sure Child Fits This Child Restraint
• Use ONLY in
HARNESS MODE
with children who weigh between 25 lbs (11.3 kg) and 65 lbs (29.4 kg) and
whose height is 54 inches (137.1 cm) or less. Determine the right installation setup for your child’s age, weight and
height.
Secure Child Properly
• Snugly adjust the harness around your child. A loose harness could cause the child to be ejected in a sudden
stop or crash, resulting in serious injury or death.
• NEVER use clothing or blankets that interfere with fastening or tightening the harness. An unsecured child
could be ejected in a sudden stop or crash!
A snug strap should not allow any slack. It lies in a relatively straight line without sagging.
It does not press on the child’s flesh or push the child’s body into an unnatural position.
To keep child warm, place a blanket over child and restraint AFTER you have properly secured
child in harness.
Make Sure Child Fits This Child Restraint
• Use ONLY in
BOOSTER MODE
with children who weigh between 40 lbs (18.1 kg) and 100 lbs (45.3 kg) and
whose height is 38 - 57 inches (97 - 145 cm). Determine the right installation setup for your child’s age, weight,
height and ability to sit properly at all times.
background
8
9
IMPORTANT WARNINGS
FAILURE TO FOLLOW THESE INSTRUCTIONS AND THE PRODUCT
LABELS CAN RESULT IN SERIOUS INJURY OR DEATH TO YOUR CHILD.
Take Time to Read This User Guide
• Carefully read and understand all instructions and warnings in this User Guide. Your child’s safety depends
on you knowing how to setup, install and use this Child Restraint properly.
• Before installing this Child Restraint in a vehicle, be sure to also check the vehicle owner’s manual for
information on proper installation.
• NEVER allow others to use this Child Restraint until they have read and understood all instructions in this
User Guide.
• This Child Restraint is not intended for use outside of the vehicle.
WARNING
DEATH or SERIOUS INJURY CAN OCCUR
IMPORTANT WARNINGS
WARNING
DEATH or SERIOUS INJURY CAN OCCUR
Make Sure Child Fits This Child Restraint
• Use ONLY in
HARNESS MODE
with children who weigh between 25 lbs (11.3 kg) and 65 lbs (29.4 kg) and
whose height is 54 inches (137.1 cm) or less. Determine the right installation setup for your child’s age, weight and
height.
Secure Child Properly
• Snugly adjust the harness around your child. A loose harness could cause the child to be ejected in a sudden
stop or crash, resulting in serious injury or death.
• NEVER use clothing or blankets that interfere with fastening or tightening the harness. An unsecured child
could be ejected in a sudden stop or crash!
A snug strap should not allow any slack. It lies in a relatively straight line without sagging.
It does not press on the child’s flesh or push the child’s body into an unnatural position.
To keep child warm, place a blanket over child and restraint AFTER you have properly secured
child in harness.
Make Sure Child Fits This Child Restraint
• Use ONLY in
BOOSTER MODE
with children who weigh between 40 lbs (18.1 kg) and 100 lbs (45.3 kg) and
whose height is 38 - 57 inches (97 - 145 cm). Determine the right installation setup for your child’s age, weight,
height and ability to sit properly at all times.
background
10
11
WARNING
DEATH or SERIOUS INJURY CAN OCCUR
• NEVER install in rear facing, side facing or on the back of a folded down vehicle seat.
• ALWAYS use this Child Restraint in the forward-facing orientation.
• ALWAYS secure this Child Restraint with the vehicle’s child restraint anchorage system (LATCH) if
available OR the vehicle seat belt when used in harness mode. Refer to Page 5 for proper use/child weight
limits when installing with LATCH.
• DO NOT use the lower anchors of the child restraint anchorage system (LATCH SYSTEM) with the
internal harness of the Child Restraint when restraining a child weighing more than 40 lbs (18.1 kg).
• NEVER use this seat in booster mode with only a Vehicle Lap Belt.
• Use ONLY the vehicle’s Lap-Shoulder Belt system when restraining a child in this Booster Seat.
WARNING
DEATH or SERIOUS INJURY CAN OCCUR
Install Child Restraint Correctly
• DO NOT PLACE THIS CHILD RESTRAINT IN VEHICLE SEATING LOCATION WITH A FRONTAL AIR
BAG, UNLESS THE AIR BAG CAN BE TURNED OFF. If the airbag inflates, it can cause serious injury or
death to your child. For vehicles with side air bags, refer to your vehicle owner’s manual for information on
your child restraint installation.
According to accident statistics, children are safer when properly restrained in the rear seating
positions rather than in the front seat.
IMPORTANT WARNINGS
IMPORTANT WARNINGS
Install Child Restraint Correctly
• ALWAYS install this Child Restraint in a back seat if possible.
Secure Child Properly
• ALWAYS check to make sure the buckle is securely latched. If the buckle separates, child could be killed or seriously
injured.
• Do not allow children to play in or around the Child Restraint.
• ALWAYS keep child properly secured whenever child is in Child Restraint.
• Position Lap-Shoulder Belt on your child in this Booster Seat. A loose or improperly positioned Lap-Shoulder
Belt could cause the child to be ejected in a sudden stop or crash, resulting in serious injury or death.
• Make sure vehicle Lap-Shoulder Belt is not loose on child in this Booster Seat. The belt must be kept snug
across child’s thighs and resting on the shoulder and across the center of the chest.
background
10
11
WARNING
DEATH or SERIOUS INJURY CAN OCCUR
• NEVER install in rear facing, side facing or on the back of a folded down vehicle seat.
• ALWAYS use this Child Restraint in the forward-facing orientation.
• ALWAYS secure this Child Restraint with the vehicle’s child restraint anchorage system (LATCH) if
available OR the vehicle seat belt when used in harness mode. Refer to Page 5 for proper use/child weight
limits when installing with LATCH.
• DO NOT use the lower anchors of the child restraint anchorage system (LATCH SYSTEM) with the
internal harness of the Child Restraint when restraining a child weighing more than 40 lbs (18.1 kg).
• NEVER use this seat in booster mode with only a Vehicle Lap Belt.
• Use ONLY the vehicle’s Lap-Shoulder Belt system when restraining a child in this Booster Seat.
WARNING
DEATH or SERIOUS INJURY CAN OCCUR
Install Child Restraint Correctly
• DO NOT PLACE THIS CHILD RESTRAINT IN VEHICLE SEATING LOCATION WITH A FRONTAL AIR
BAG, UNLESS THE AIR BAG CAN BE TURNED OFF. If the airbag inflates, it can cause serious injury or
death to your child. For vehicles with side air bags, refer to your vehicle owner’s manual for information on
your child restraint installation.
According to accident statistics, children are safer when properly restrained in the rear seating
positions rather than in the front seat.
IMPORTANT WARNINGS
IMPORTANT WARNINGS
Install Child Restraint Correctly
• ALWAYS install this Child Restraint in a back seat if possible.
Secure Child Properly
• ALWAYS check to make sure the buckle is securely latched. If the buckle separates, child could be killed or seriously
injured.
• Do not allow children to play in or around the Child Restraint.
• ALWAYS keep child properly secured whenever child is in Child Restraint.
• Position Lap-Shoulder Belt on your child in this Booster Seat. A loose or improperly positioned Lap-Shoulder
Belt could cause the child to be ejected in a sudden stop or crash, resulting in serious injury or death.
• Make sure vehicle Lap-Shoulder Belt is not loose on child in this Booster Seat. The belt must be kept snug
across child’s thighs and resting on the shoulder and across the center of the chest.
background
12
13
Check Condition of Restraint
• DO NOT use if the Harness or LATCH straps are cut, frayed or damaged.
• DO NOT use this Child Restraint if it is more than 8 years old. Check manufacturer’s label on underside
of Child Restraint for the “Do Not Use After” date.
• DO NOT use any accessories, pads or products not included with this Child Restraint, unless
approved by Chicco USA. Doing so will void the warranty of this Child Restraint.
• You MUST replace this Child Restraint if it has been involved in a crash, even if you cannot see visible
damage. A damaged Child Restraint may not protect your child in a future crash.
• Never use the harness or adjuster strap to lift or carry this Child Restraint. Always carry this Child Restraint
by the tether strap or shell.
• Do not modify your Child Restraint.
• NEVER remove harness from Child Restraint without the proper removal and installation instructions
available from Chicco USA. Contact us by visiting the Chicco website at www.chiccousa.com or
call 1-877-424-4226.
• Do not use Child Restraint if any component is damaged, broken, or missing parts.
Call 1-877-424-4226 to find out if the damaged part or parts can be replaced.
IMPORTANT WARNINGS
IMPORTANT WARNINGS
WARNING
DEATH or SERIOUS INJURY CAN OCCUR
WARNING
DEATH or SERIOUS INJURY CAN OCCUR
Install Child Restraint Correctly
• ALWAYS secure this seat, with the LATCH system or the vehicle’s lap-shoulder belt when unoccupied. It
could injure other occupants in a sudden stop or crash.
• ALWAYS use the top tether strap on this Child Restraint when used in harness mode, if a tether anchor is
available.
• NEVER use Child Restraint in a vehicle seating position where it cannot be secured tightly when installed for
harness mode. A loosely installed Child Restraint will not protect your child in a crash.
• DO NOT install this Child Restraint using an inflatable seat belt for harness mode. The interaction of the
inflatable portion of the vehicle’s belt with this Child Restraint can result in serious injury or death. Install
using LATCH instead, or move the Child Restraint to a position with a suitable seat belt type. Refer to your
vehicle owner’s manual for instructions for use with this Booster Seat.
Ensure Child’s Safety When Using Child Restraint
• STRANGULATION HAZARD: Your child can strangle in a loose Restraint Harness. Never leave your child
unattended in the vehicle.
background
12
13
Check Condition of Restraint
• DO NOT use if the Harness or LATCH straps are cut, frayed or damaged.
• DO NOT use this Child Restraint if it is more than 8 years old. Check manufacturer’s label on underside
of Child Restraint for the “Do Not Use After” date.
• DO NOT use any accessories, pads or products not included with this Child Restraint, unless
approved by Chicco USA. Doing so will void the warranty of this Child Restraint.
• You MUST replace this Child Restraint if it has been involved in a crash, even if you cannot see visible
damage. A damaged Child Restraint may not protect your child in a future crash.
• Never use the harness or adjuster strap to lift or carry this Child Restraint. Always carry this Child Restraint
by the tether strap or shell.
• Do not modify your Child Restraint.
• NEVER remove harness from Child Restraint without the proper removal and installation instructions
available from Chicco USA. Contact us by visiting the Chicco website at www.chiccousa.com or
call 1-877-424-4226.
• Do not use Child Restraint if any component is damaged, broken, or missing parts.
Call 1-877-424-4226 to find out if the damaged part or parts can be replaced.
IMPORTANT WARNINGS
IMPORTANT WARNINGS
WARNING
DEATH or SERIOUS INJURY CAN OCCUR
WARNING
DEATH or SERIOUS INJURY CAN OCCUR
Install Child Restraint Correctly
• ALWAYS secure this seat, with the LATCH system or the vehicle’s lap-shoulder belt when unoccupied. It
could injure other occupants in a sudden stop or crash.
• ALWAYS use the top tether strap on this Child Restraint when used in harness mode, if a tether anchor is
available.
• NEVER use Child Restraint in a vehicle seating position where it cannot be secured tightly when installed for
harness mode. A loosely installed Child Restraint will not protect your child in a crash.
• DO NOT install this Child Restraint using an inflatable seat belt for harness mode. The interaction of the
inflatable portion of the vehicle’s belt with this Child Restraint can result in serious injury or death. Install
using LATCH instead, or move the Child Restraint to a position with a suitable seat belt type. Refer to your
vehicle owner’s manual for instructions for use with this Booster Seat.
Ensure Child’s Safety When Using Child Restraint
• STRANGULATION HAZARD: Your child can strangle in a loose Restraint Harness. Never leave your child
unattended in the vehicle.
background
14
15
BEST PRACTICES
• Ensure all vehicle occupants are properly restrained before traveling.
Unrestrained occupants can be thrown around and may be seriously injured or
seriously injure other occupants in a sharp turn, sudden stop or crash.
• Do not leave loose objects, such as books, bags, etc., in the back of the vehicle.
In the event of a sharp turn, sudden stop, or crash, loose objects can be thrown
around and possibly cause serious injury to vehicle occupants.
• Cover the Child Restraint when the vehicle is parked in sunlight. Parts of a
Child Restraint can become very hot if left in the sun. Contact with these parts
can burn a child’s skin. Always check the surface of any metal or plastic parts
before putting your child in the Child Restraint.
• To avoid strangulation, Do not allow children to play with vehicle seat belts.
If possible, move unused belts out of reach.
• Do not use anything to raise the Child Restraint off the vehicle seat. In a sharp
turn, sudden stop, or crash, the Child Restraint could slide and potentially
cause serious injury.
• Never use a second-hand Child Restraint with an unknown history.
NEED HELP?
Need Help Securing Your Child Restraint?
The following sources are available to help ensure your Child Restraint is
properly installed:
• Contact Chicco, USA by visiting our website at www.chiccousa.com or
calling our Customer Service 1-877-424-4226. Please have Model and
Serial Number available when you call. These are located in the tether
storage compartment of the Child Restraint.
• Refer to your vehicle manual for Child Restraint installation tips.
• Contact a certified Child Passenger Safety Technician in your area by
visiting safercar.gov and select “Find Local Child Seat Help” or call
1-866-SEAT CHECK (1-866-732-8243).
background
14
15
BEST PRACTICES
• Ensure all vehicle occupants are properly restrained before traveling.
Unrestrained occupants can be thrown around and may be seriously injured or
seriously injure other occupants in a sharp turn, sudden stop or crash.
• Do not leave loose objects, such as books, bags, etc., in the back of the vehicle.
In the event of a sharp turn, sudden stop, or crash, loose objects can be thrown
around and possibly cause serious injury to vehicle occupants.
• Cover the Child Restraint when the vehicle is parked in sunlight. Parts of a
Child Restraint can become very hot if left in the sun. Contact with these parts
can burn a child’s skin. Always check the surface of any metal or plastic parts
before putting your child in the Child Restraint.
• To avoid strangulation, Do not allow children to play with vehicle seat belts.
If possible, move unused belts out of reach.
• Do not use anything to raise the Child Restraint off the vehicle seat. In a sharp
turn, sudden stop, or crash, the Child Restraint could slide and potentially
cause serious injury.
• Never use a second-hand Child Restraint with an unknown history.
NEED HELP?
Need Help Securing Your Child Restraint?
The following sources are available to help ensure your Child Restraint is
properly installed:
• Contact Chicco, USA by visiting our website at www.chiccousa.com or
calling our Customer Service 1-877-424-4226. Please have Model and
Serial Number available when you call. These are located in the tether
storage compartment of the Child Restraint.
• Refer to your vehicle manual for Child Restraint installation tips.
• Contact a certified Child Passenger Safety Technician in your area by
visiting safercar.gov and select “Find Local Child Seat Help” or call
1-866-SEAT CHECK (1-866-732-8243).
background
16
17
CHILD RESTRAINT OVERVIEW
CHILD RESTRAINT OVERVIEW
CHILD RESTRAINT COMPONENTS CHILD RESTRAINT COMPONENTS
Tether
Storage
Tether
Strap
Vehicle Belt
Lock-Off
LATCH Adjuster
Vehicle Belt
Lock-Off
Harness
Strap
Chest Clip
Harness
Adjustment
Strap
Harness
Release Button
Recline
Adjustment Handle
Headrest
Adjustment Tab
Recline Position
Indicator
Bubble Level
Indicator
Booster
Belt Path
Booster Shoulder
Belt Guide
Cup Holder
Cup Holder
Release Button
Harness Buckle
Chest Clip Pads
Shoulder Pads
LATCH Storage
Compartment
Crotch Strap Pad
background
16
17
CHILD RESTRAINT OVERVIEW
CHILD RESTRAINT OVERVIEW
CHILD RESTRAINT COMPONENTS CHILD RESTRAINT COMPONENTS
Tether
Storage
Tether
Strap
Vehicle Belt
Lock-Off
LATCH Adjuster
Vehicle Belt
Lock-Off
Harness
Strap
Chest Clip
Harness
Adjustment
Strap
Harness
Release Button
Recline
Adjustment Handle
Headrest
Adjustment Tab
Recline Position
Indicator
Bubble Level
Indicator
Booster
Belt Path
Booster Shoulder
Belt Guide
Cup Holder
Cup Holder
Release Button
Harness Buckle
Chest Clip Pads
Shoulder Pads
LATCH Storage
Compartment
Crotch Strap Pad
background
18
19
CHILD RESTRAINT OVERVIEW
CHILD RESTRAINT OVERVIEW
LATCH AND TETHER COMPONENTS LATCH AND TETHER COMPONENTS
A
B
C
D
Tether Strap
Tether Strap Adjuster
Tether Hook
LATCH Adjuster
LATCH Strap
LATCH Connectors
E
F
A
B
C
E
F
D
Tether
LATCH
F
TETHER:
LATCH:
E
background
18
19
CHILD RESTRAINT OVERVIEW
CHILD RESTRAINT OVERVIEW
LATCH AND TETHER COMPONENTS LATCH AND TETHER COMPONENTS
A
B
C
D
Tether Strap
Tether Strap Adjuster
Tether Hook
LATCH Adjuster
LATCH Strap
LATCH Connectors
E
F
A
B
C
E
F
D
Tether
LATCH
F
TETHER:
LATCH:
E
background
20
21
CHILD RESTRAINT OVERVIEW
CHILD RESTRAINT OVERVIEW
LATCH AND TETHER STORAGE LATCH AND TETHER STORAGE
LATCH STORAGE:
1
Pull forward on the Seat Bottom Pad to locate the LATCH Storage
Compartment.
Open the compartment door and store both LATCH straps in the
compartments. Fold the LATCH straps as show (2a). Make sure the
LATCH Storage Compartment is properly closed before replacing
fabric.
Always make sure LATCH Components are properly
stored in the compartments when not in use.
TETHER STORAGE:
Store Tether in the compartment in the back of Child Restraint
when not in use. Attach Tether Hook onto bar and pull strap tight.
Make sure compartment door is properly closed.
3
2a
3
2
1
2
background
20
21
CHILD RESTRAINT OVERVIEW
CHILD RESTRAINT OVERVIEW
LATCH AND TETHER STORAGE LATCH AND TETHER STORAGE
LATCH STORAGE:
1
Pull forward on the Seat Bottom Pad to locate the LATCH Storage
Compartment.
Open the compartment door and store both LATCH straps in the
compartments. Fold the LATCH straps as show (2a). Make sure the
LATCH Storage Compartment is properly closed before replacing
fabric.
Always make sure LATCH Components are properly
stored in the compartments when not in use.
TETHER STORAGE:
Store Tether in the compartment in the back of Child Restraint
when not in use. Attach Tether Hook onto bar and pull strap tight.
Make sure compartment door is properly closed.
3
2a
3
2
1
2
background
22
23
CHILD RESTRAINT OVERVIEW
CHILD RESTRAINT OVERVIEW
SELECT HARNESS MODE
WARNING! HARNESS MODE use of this Child Restraint is ONLY for
children who meet ALL of the requirements shown here. If the child is not
within these requirements because they are too small, select a different
child seat (select a rear facing child restraint). If the child is not within these
requirements because the child is too large, review the BOOSTER MODE
guidelines on page 25.
Use HARNESS MODE with children:
• Who are at least two years old.
• Who weigh between 25 and 65 lbs
(11.3 – 29.4 kg)
• Who are 54” (137.1 cm) tall or less.
• When Harness Straps can be positioned
at or above the child’s shoulders*.
See Harness Height
Adjustment on page 74.
SELECT HARNESS MODE
HARNESS MODE
25 lbs. 40 lbs. 65 lbs.
(11.3 kg) (18.1 kg) (29.4 kg)
NO LATCH
*
background
22
23
CHILD RESTRAINT OVERVIEW
CHILD RESTRAINT OVERVIEW
SELECT HARNESS MODE
WARNING! HARNESS MODE use of this Child Restraint is ONLY for
children who meet ALL of the requirements shown here. If the child is not
within these requirements because they are too small, select a different
child seat (select a rear facing child restraint). If the child is not within these
requirements because the child is too large, review the BOOSTER MODE
guidelines on page 25.
Use HARNESS MODE with children:
• Who are at least two years old.
• Who weigh between 25 and 65 lbs
(11.3 – 29.4 kg)
• Who are 54” (137.1 cm) tall or less.
• When Harness Straps can be positioned
at or above the child’s shoulders*.
See Harness Height
Adjustment on page 74.
SELECT HARNESS MODE
HARNESS MODE
25 lbs. 40 lbs. 65 lbs.
(11.3 kg) (18.1 kg) (29.4 kg)
NO LATCH
*
background
24
25
CHILD RESTRAINT OVERVIEW
CHILD RESTRAINT OVERVIEW
WARNING! BOOSTER MODE use of this Child Restraint is ONLY for
children who meet ALL of the requirements shown here. If the child is not
within these requirements because the child is too small, review the
HARNESS MODE guidelines on page 23.
SELECT BOOSTER MODE SELECT BOOSTER MODE
Use BOOSTER MODE with children:
• Who are at least four year old.
• Who weigh between 40 and 100 lbs
(18.1 – 45.3 kg).
• Who are 38” to 57” (97 - 145 cm) tall.
• Who demonstrate an ability to sit relatively still
and properly in a seat belt at all times.
See Adjusting Shoulder Belt
Guide Height on page 100.
BOOSTER MODE
40 lbs. 100 lbs.
(18.1 kg) (45.3 kg)
background
24
25
CHILD RESTRAINT OVERVIEW
CHILD RESTRAINT OVERVIEW
WARNING! BOOSTER MODE use of this Child Restraint is ONLY for
children who meet ALL of the requirements shown here. If the child is not
within these requirements because the child is too small, review the
HARNESS MODE guidelines on page 23.
SELECT BOOSTER MODE SELECT BOOSTER MODE
Use BOOSTER MODE with children:
• Who are at least four year old.
• Who weigh between 40 and 100 lbs
(18.1 – 45.3 kg).
• Who are 38” to 57” (97 - 145 cm) tall.
• Who demonstrate an ability to sit relatively still
and properly in a seat belt at all times.
See Adjusting Shoulder Belt
Guide Height on page 100.
BOOSTER MODE
40 lbs. 100 lbs.
(18.1 kg) (45.3 kg)
background
26
27
CHILD RESTRAINT OVERVIEW
CHILD RESTRAINT OVERVIEW
ADJUSTING CROTCH STRAP ADJUSTING CROTCH STRAP
2a
2b 2c
Undo the Chest Clip and Buckle Tongues. Remove Crotch Strap Pad (see
page 92). Pull forward on the Seat Bottom pad and push the Crotch
Strap through the slot on the Seat Bottom pad.
With the Crotch Strap in the Position 1 (2a), guide the Crotch Strap
forward through the Crotch Strap compartment (2b) and pull the Crotch
Strap into Position 2 (2c). Thread Crotch Strap through the correct
crotch strap opening and reposition the Seat Bottom pad. Reverse this
step to move the Crotch Strap back to Position 1.
1
2
1
background
26
27
CHILD RESTRAINT OVERVIEW
CHILD RESTRAINT OVERVIEW
ADJUSTING CROTCH STRAP ADJUSTING CROTCH STRAP
2a
2b 2c
Undo the Chest Clip and Buckle Tongues. Remove Crotch Strap Pad (see
page 92). Pull forward on the Seat Bottom pad and push the Crotch
Strap through the slot on the Seat Bottom pad.
With the Crotch Strap in the Position 1 (2a), guide the Crotch Strap
forward through the Crotch Strap compartment (2b) and pull the Crotch
Strap into Position 2 (2c). Thread Crotch Strap through the correct
crotch strap opening and reposition the Seat Bottom pad. Reverse this
step to move the Crotch Strap back to Position 1.
1
2
1
background
28
29
CHILD RESTRAINT OVERVIEW
CHILD RESTRAINT OVERVIEW
See page 34 for “Vehicle Seating Positions” before installing. Correctly
fit the Child Restraint to your child by adjusting the Headrest. Pull up
on the Headrest Adjustment Tab located on the back of the Child
Restraint, and adjust the Headrest up or down.
Make sure the Headrest is locked into position. Release the Headrest
Adjustment Tab and slightly raise/lower the Headrest until you hear a
click, indicating that the Headrest is locked into position.
2
1
The Headrest has 9 height positions to allow the Child Restraint to grow with
your child. Ensure that the child’s head is positioned correctly within the
Headrest and that the Shoulder Belt is positioned correctly over the child’s
shoulder.
“CLICK”
1
ADJUSTING HEADREST ADJUSTING HEADREST
2
background
28
29
CHILD RESTRAINT OVERVIEW
CHILD RESTRAINT OVERVIEW
See page 34 for “Vehicle Seating Positions” before installing. Correctly
fit the Child Restraint to your child by adjusting the Headrest. Pull up
on the Headrest Adjustment Tab located on the back of the Child
Restraint, and adjust the Headrest up or down.
Make sure the Headrest is locked into position. Release the Headrest
Adjustment Tab and slightly raise/lower the Headrest until you hear a
click, indicating that the Headrest is locked into position.
2
1
The Headrest has 9 height positions to allow the Child Restraint to grow with
your child. Ensure that the child’s head is positioned correctly within the
Headrest and that the Shoulder Belt is positioned correctly over the child’s
shoulder.
“CLICK”
1
ADJUSTING HEADREST ADJUSTING HEADREST
2
background
30
31
CHILD RESTRAINT OVERVIEW
CHILD RESTRAINT OVERVIEW
1
2
3
4
1
2
3
4
1a
Squeeze the Recline Adjustment Handle on the front of the Child
Restraint and adjust to a upright or reclined position, as desired (1a).
Make sure the seat is in a locked position and that the bubble level is
between the lines for the appropriate installation mode.
1
ADJUSTING RECLINE ADJUSTING RECLINE
1
background
30
31
CHILD RESTRAINT OVERVIEW
CHILD RESTRAINT OVERVIEW
1
2
3
4
1
2
3
4
1a
Squeeze the Recline Adjustment Handle on the front of the Child
Restraint and adjust to a upright or reclined position, as desired (1a).
Make sure the seat is in a locked position and that the bubble level is
between the lines for the appropriate installation mode.
1
ADJUSTING RECLINE ADJUSTING RECLINE
1
background
32
33
CHILD RESTRAINT OVERVIEW
CHILD RESTRAINT OVERVIEW
ATTACHING THE CUP HOLDER:
Match the “R” and “L” Cup Holders to the Child Restraint, as shown.
Slide the Cup Holder into the Child Restraint. Make sure the Cup Holder
Lip fits behind the groove on the Child Restraint, as shown. Push down
on the Cup Holder until it clicks into place. Repeat for the other side.
REMOVING THE CUP HOLDER
To remove, press the button located on the bottom edge of the Cup
Holder. Lift up to remove.
3
1
CUP HOLDER CUP HOLDER
R
L
R
R
WARNING - Do NOT use Cup Holder to hold hot liquids.
PLASTIC CONTAINERS ONLY - No glass or metal containers.
Only use cups with less than 12 oz. capacity. Never place sharp or
pointed objects in Cup Holder. In a crash these objects could hit
you or your child and cause serious injuries.
1
2
2
Lip
background
32
33
CHILD RESTRAINT OVERVIEW
CHILD RESTRAINT OVERVIEW
ATTACHING THE CUP HOLDER:
Match the “R” and “L” Cup Holders to the Child Restraint, as shown.
Slide the Cup Holder into the Child Restraint. Make sure the Cup Holder
Lip fits behind the groove on the Child Restraint, as shown. Push down
on the Cup Holder until it clicks into place. Repeat for the other side.
REMOVING THE CUP HOLDER
To remove, press the button located on the bottom edge of the Cup
Holder. Lift up to remove.
3
1
CUP HOLDER CUP HOLDER
R
L
R
R
WARNING - Do NOT use Cup Holder to hold hot liquids.
PLASTIC CONTAINERS ONLY - No glass or metal containers.
Only use cups with less than 12 oz. capacity. Never place sharp or
pointed objects in Cup Holder. In a crash these objects could hit
you or your child and cause serious injuries.
1
2
2
Lip
background
35
VEHICLE INFORMATION
34
VEHICLE INFORMATION
VEHICLE SEATING POSITIONS
Some vehicles have no seating
positions which are compatible
with this Child Restraint. If in
doubt, contact the vehicle
manufacturer for assistance.
Only forward-facing vehicle
seats should be used with this
Child Restraint.
Make sure no more than 3 inches
of the Child Restraint base is past
the edge of the vehicle seat.
Do not use on a folded
down vehicle seat back.
VEHICLE SEATING POSITIONS
WARNING! WHEN USING THIS CHILD RESTRAINT, DO NOT PLACE THIS
BOOSTER SEAT IN A VEHICLE SEATING LOCATION WITH A FRONTAL AIR
BAG, UNLESS THE AIR BAG CAN BE TURNED OFF.
The back seat is the safest place for children 12 and under. See your vehicle
owner’s manual for Booster Seat installation and instructions.
When using the seat in BOOSTER MODE,
always install in a vehicle seat with a
3-point seat belt (shoulder belt and lap
belt). NEVER use lap belt only.
background
35
VEHICLE INFORMATION
34
VEHICLE INFORMATION
VEHICLE SEATING POSITIONS
Some vehicles have no seating
positions which are compatible
with this Child Restraint. If in
doubt, contact the vehicle
manufacturer for assistance.
Only forward-facing vehicle
seats should be used with this
Child Restraint.
Make sure no more than 3 inches
of the Child Restraint base is past
the edge of the vehicle seat.
Do not use on a folded
down vehicle seat back.
VEHICLE SEATING POSITIONS
WARNING! WHEN USING THIS CHILD RESTRAINT, DO NOT PLACE THIS
BOOSTER SEAT IN A VEHICLE SEATING LOCATION WITH A FRONTAL AIR
BAG, UNLESS THE AIR BAG CAN BE TURNED OFF.
The back seat is the safest place for children 12 and under. See your vehicle
owner’s manual for Booster Seat installation and instructions.
When using the seat in BOOSTER MODE,
always install in a vehicle seat with a
3-point seat belt (shoulder belt and lap
belt). NEVER use lap belt only.
background
37
VEHICLE INFORMATION
36
VEHICLE INFORMATION
VEHICLE SEAT BELTS - HARNESS MODE
The following types of vehicle belts MUST NOT be used to install this Child
Restraint in HARNESS MODE.
If any of the belt types listed below are in the chosen
seating position, choose another vehicle seating position OR use LATCH if available.
1 2 3
4
1. Motorized (automatic) vehicle belts.
2. Door mounted vehicle belts. 5. Inflatable seat belts.
4. Non-Locking (ELR) Lap Belts.
3. Lap-shoulder Belts with 2 retractors (unless Lap Belt has a “Lock Mode”).
5
Vehicle seat belts differ from vehicle to vehicle. Refer to your vehicle owner’s
manual for specific information about seat belts and their use with Child
Restraints. For simplest installation use LATCH - Refer to page 40 for details.
Shoulder belt with switchable retractor:
Putting the shoulder belt in the locked/switched mode as the last step is
optional. The shoulder belt Lock-Off replaces the need for the locked/
switched mode.
VEHICLE SEAT BELTS - HARNESS MODE
The information in this section only applies to installation with vehicle seat belts in
HARNESS MODE
.
background
37
VEHICLE INFORMATION
36
VEHICLE INFORMATION
VEHICLE SEAT BELTS - HARNESS MODE
The following types of vehicle belts MUST NOT be used to install this Child
Restraint in HARNESS MODE.
If any of the belt types listed below are in the chosen
seating position, choose another vehicle seating position OR use LATCH if available.
1 2 3
4
1. Motorized (automatic) vehicle belts.
2. Door mounted vehicle belts. 5. Inflatable seat belts.
4. Non-Locking (ELR) Lap Belts.
3. Lap-shoulder Belts with 2 retractors (unless Lap Belt has a “Lock Mode”).
5
Vehicle seat belts differ from vehicle to vehicle. Refer to your vehicle owner’s
manual for specific information about seat belts and their use with Child
Restraints. For simplest installation use LATCH - Refer to page 40 for details.
Shoulder belt with switchable retractor:
Putting the shoulder belt in the locked/switched mode as the last step is
optional. The shoulder belt Lock-Off replaces the need for the locked/
switched mode.
VEHICLE SEAT BELTS - HARNESS MODE
The information in this section only applies to installation with vehicle seat belts in
HARNESS MODE
.
background
39
VEHICLE INFORMATION
38
VEHICLE INFORMATION
The following types of vehicle belts MUST NOT be used to install this Child
Restraint in BOOSTER MODE.
If any of the belt types listed below are in the chosen seating position, you
must choose another vehicle seating position.
1 2 3
1. Never use a Lap Belt with motorized
Shoulder belt.
2. Never use vehicle belts that are
attached to the door or that move
along a track.
3. Never use any type of Lap-Only
Belt.
VEHICLE SEAT BELTS - BOOSTER MODE
Shoulder belt with switchable retractor:
Refer to your vehicle owner’s manual for information regarding switchable
retractors and Booster Seat use.
Inflatable seat belts:
Refer to your vehicle owner’s manual for instructions for use with this
Booster Seat.
VEHICLE SEAT BELTS - BOOSTER MODE
The information in this section only applies to installation with vehicle seat belts in
BOOSTER MODE
.
background
39
VEHICLE INFORMATION
38
VEHICLE INFORMATION
The following types of vehicle belts MUST NOT be used to install this Child
Restraint in BOOSTER MODE.
If any of the belt types listed below are in the chosen seating position, you
must choose another vehicle seating position.
1 2 3
1. Never use a Lap Belt with motorized
Shoulder belt.
2. Never use vehicle belts that are
attached to the door or that move
along a track.
3. Never use any type of Lap-Only
Belt.
VEHICLE SEAT BELTS - BOOSTER MODE
Shoulder belt with switchable retractor:
Refer to your vehicle owner’s manual for information regarding switchable
retractors and Booster Seat use.
Inflatable seat belts:
Refer to your vehicle owner’s manual for instructions for use with this
Booster Seat.
VEHICLE SEAT BELTS - BOOSTER MODE
The information in this section only applies to installation with vehicle seat belts in
BOOSTER MODE
.
background
41
VEHICLE INFORMATION
40
VEHICLE INFORMATION
WHAT IS LATCH?
Vehicle
Top Tether Anchor
Points
Vehicle
Lower Anchor
Points
Vehicle
Seat Crease
(Fig. a) (Fig. b) (Fig. c)
WHAT IS LATCH?
LATCH = Lower Anchors and Tethers for CHildren
United States Motor Vehicle Safety Standards have defined a system for installing
Child Restraints in vehicles called LATCH. In Harness Mode, LATCH may ONLY
be used IN PLACE OF vehicle belt if the vehicle is equipped with LATCH anchor
points. DO NOT use both the seat belt and LATCH at the same time. Please
refer to the vehicle owner’s manual for designated LATCH locations in vehicles.
LATCH in the vehicle consists of a top tether anchor point and two lower anchor
points. Some vehicle owner’s manuals use the term “ISOFIX”. LATCH can also be
used in vehicle seating positions equipped with ISOFIX.
If the vehicle is equipped with LATCH, the vehicle lower anchor points may be visible at
the seat crease. If not visible, the seating position may be marked with a symbol (fig. a) or
a colored dot. Check the vehicle owner’s manual for vehicle top tether anchor locations.
They may be identified using one of the anchor symbols (fig. b or fig. c).
WARNING: This Child Restraint is designed to be used with
lower LATCH anchors at the standard spacing (11 inches) ONLY!
Refer to vehicle owner’s manual for information about LATCH and
Child Restraint installation positions.
background
41
VEHICLE INFORMATION
40
VEHICLE INFORMATION
WHAT IS LATCH?
Vehicle
Top Tether Anchor
Points
Vehicle
Lower Anchor
Points
Vehicle
Seat Crease
(Fig. a) (Fig. b) (Fig. c)
WHAT IS LATCH?
LATCH = Lower Anchors and Tethers for CHildren
United States Motor Vehicle Safety Standards have defined a system for installing
Child Restraints in vehicles called LATCH. In Harness Mode, LATCH may ONLY
be used IN PLACE OF vehicle belt if the vehicle is equipped with LATCH anchor
points. DO NOT use both the seat belt and LATCH at the same time. Please
refer to the vehicle owner’s manual for designated LATCH locations in vehicles.
LATCH in the vehicle consists of a top tether anchor point and two lower anchor
points. Some vehicle owner’s manuals use the term “ISOFIX”. LATCH can also be
used in vehicle seating positions equipped with ISOFIX.
If the vehicle is equipped with LATCH, the vehicle lower anchor points may be visible at
the seat crease. If not visible, the seating position may be marked with a symbol (fig. a) or
a colored dot. Check the vehicle owner’s manual for vehicle top tether anchor locations.
They may be identified using one of the anchor symbols (fig. b or fig. c).
WARNING: This Child Restraint is designed to be used with
lower LATCH anchors at the standard spacing (11 inches) ONLY!
Refer to vehicle owner’s manual for information about LATCH and
Child Restraint installation positions.
background
43
VEHICLE INFORMATION
42
VEHICLE INFORMATION
Rear Shelf
Back Wall
Back of Seat
Vehicle Floor
Vehicle Roof
WHAT IS A TETHER?WHAT IS A TETHER?
Tether anchor locations vary from vehicle to vehicle. Check
your vehicle owner’s manual and look for the tether anchor
symbol as shown. A tether reduces movement of a forward
facing child restraint in a crash and helps to achieve a tight
installation.
Vehicle tether anchors can be found in many different locations. Some
of the typical locations are shown here. Refer to your vehicle owner’s
manual for exact locations, anchor identification, and requirements.
background
43
VEHICLE INFORMATION
42
VEHICLE INFORMATION
Rear Shelf
Back Wall
Back of Seat
Vehicle Floor
Vehicle Roof
WHAT IS A TETHER?WHAT IS A TETHER?
Tether anchor locations vary from vehicle to vehicle. Check
your vehicle owner’s manual and look for the tether anchor
symbol as shown. A tether reduces movement of a forward
facing child restraint in a crash and helps to achieve a tight
installation.
Vehicle tether anchors can be found in many different locations. Some
of the typical locations are shown here. Refer to your vehicle owner’s
manual for exact locations, anchor identification, and requirements.
background
44
45
HARNESS INSTALLATION
HARNESS INSTALLATION
HARNESS SETUP
1
IF TETHER ANCHOR IS AVAILABLE IN YOUR VEHICLE - Before placing
the Child Restraint in the vehicle, remove Tether from the tether
compartment. If a tether anchor is not available, the Tether
should be stored properly (See page 20).
See page 34 for “Vehicle Seating Positions” before installing. Make sure the
vehicle is on a level surface, if possible.
LEVEL
SLO PE
2
1
HARNESS SETUP
background
44
45
HARNESS INSTALLATION
HARNESS INSTALLATION
HARNESS SETUP
1
IF TETHER ANCHOR IS AVAILABLE IN YOUR VEHICLE - Before placing
the Child Restraint in the vehicle, remove Tether from the tether
compartment. If a tether anchor is not available, the Tether
should be stored properly (See page 20).
See page 34 for “Vehicle Seating Positions” before installing. Make sure the
vehicle is on a level surface, if possible.
2
1
HARNESS SETUP
background
46
47
HARNESS INSTALLATION
HARNESS INSTALLATION
4
HARNESS SETUP
Place the Child Restraint on the vehicle seat making sure the installation
lines (located on the Seat Base) are PARALLEL with the vehicle seating
surface.
Check that the headrest of the vehicle seat does not interfere with the
Headrest of the Child Restraint.
If the vehicle headrest pushes the Child Restraint forward, check your
vehicle owner’s manual to see if the headrest removal is permitted. If so,
follow the vehicle owner’s manual to remove the headrest. If it is not
permitted, raise the vehicle headrest or move the Child Restraint to a
different vehicle seating location.
4
3
HARNESS SETUP
Installation
Lines
Vehicle
Seating
Surface
3
background
46
47
HARNESS INSTALLATION
HARNESS INSTALLATION
4
HARNESS SETUP
Place the Child Restraint on the vehicle seat making sure the installation
lines (located on the Seat Base) are PARALLEL with the vehicle seating
surface.
Check that the headrest of the vehicle seat does not interfere with the
Headrest of the Child Restraint.
If the vehicle headrest pushes the Child Restraint forward, check your
vehicle owner’s manual to see if the headrest removal is permitted. If so,
follow the vehicle owner’s manual to remove the headrest. If it is not
permitted, raise the vehicle headrest or move the Child Restraint to a
different vehicle seating location.
4
3
HARNESS SETUP
Installation
Lines
Vehicle
Seating
Surface
3
background
48
49
HARNESS INSTALLATION
HARNESS INSTALLATION
5
6
L E V E L
SLO P E
6
HARNESS SETUP
With the Child Restraint facing forward on selected vehicle seat; make
sure it is not blocking the vehicle belt buckle. Lay Tether Strap over
the back of the vehicle seat.
6
5
• LATCH installation continued on page 50.
• Lap-Shoulder Belt installation continued on page 58.
• Lap Belt Only installation continued on page 64.
Installation Options:
Installation on a Level Surface: Locate the Bubble Level Indicator
label and re-adjust the seat recline to any position that the Bubble
falls between the lines.
Installation on a Slope: If vehicle is on a slope, adjust the seat
recline to position 3 or position 4 only.
L E V E L
SLO PE
L E V E L
SLO PE
HARNESS SETUP
1
2
3
4
L E V E L
SLO P E
Check to make sure the install line has remained parallel to the vehicle
seating surface (see step 3 pg. 47).
7
background
48
49
HARNESS INSTALLATION
HARNESS INSTALLATION
5
6
L E V E L
SLO P E
6
HARNESS SETUP
With the Child Restraint facing forward on selected vehicle seat; make
sure it is not blocking the vehicle belt buckle. Lay Tether Strap over
the back of the vehicle seat.
6
5
• LATCH installation continued on page 50.
• Lap-Shoulder Belt installation continued on page 58.
• Lap Belt Only installation continued on page 64.
Installation Options:
Installation on a Level Surface: Locate the Bubble Level Indicator
label and re-adjust the seat recline to any position that the Bubble
falls between the lines.
Installation on a Slope: If vehicle is on a slope, adjust the seat
recline to position 3 or position 4 only.
L E V E L
SLO PE
L E V E L
SLO PE
HARNESS SETUP
1
2
3
4
L E V E L
SLO P E
Check to make sure the install line has remained parallel to the vehicle
seating surface (see step 3 pg. 47).
7
background
50
51
HARNESS INSTALLATION
HARNESS INSTALLATION
INSTALL USING LATCH
1 2 3
INSTALL USING LATCH
If LATCH anchors are out and in correct position skip to Step 6 (pg
54). Undo the snap attaching the Armrest Fabric to the Backrest Seat
Pad. Repeat this step for the other side.
Pull forward on the Seat Bottom Pad and lift up on the Backrest Seat
Pad to locate the LATCH Storage Compartment.
Open the compartment door and remove LATCH straps.
2
1
Do not use the LATCH anchors of the Child Restraint anchorage system
with the internal harness of the child restraint when restraining a child
weighing more than 40 lbs (18.1 kg). Always use the Top Tether.
When installing with LATCH in vehicle equipped with inflatable seat
belts, the unused seat belt should NOT be buckled behind the Child
Restraint System as this will engage the inflatable portion of the belt.
3
background
50
51
HARNESS INSTALLATION
HARNESS INSTALLATION
INSTALL USING LATCH
1 2 3
INSTALL USING LATCH
If LATCH anchors are out and in correct position skip to Step 6 (pg
54). Undo the snap attaching the Armrest Fabric to the Backrest Seat
Pad. Repeat this step for the other side.
Pull forward on the Seat Bottom Pad and lift up on the Backrest Seat
Pad to locate the LATCH Storage Compartment.
Open the compartment door and remove LATCH straps.
2
1
Do not use the LATCH anchors of the Child Restraint anchorage system
with the internal harness of the child restraint when restraining a child
weighing more than 40 lbs (18.1 kg). Always use the Top Tether.
When installing with LATCH in vehicle equipped with inflatable seat
belts, the unused seat belt should NOT be buckled behind the Child
Restraint System as this will engage the inflatable portion of the belt.
3
background
52
53
HARNESS INSTALLATION
HARNESS INSTALLATION
INSTALL USING LATCH
4
5b
5a
5b
INSTALL USING LATCH
Thread the LATCH connectors behind the seat fabric and out the side
openings on the seat back, as shown.
Loosen BOTH LATCH Adjuster straps to their full length.
Make sure the LATCH straps lay flat against the seat back (5a). If the
straps are twisted they will not move freely from side to side. Then
close the LATCH Connector Storage compartment door and replace
BOTH seat pads (5b). Make sure to re-attach both snaps on the
Backrest Seat Pad to the Armrest Fabric.
5
4
background
52
53
HARNESS INSTALLATION
HARNESS INSTALLATION
INSTALL USING LATCH
4
5b
5a
5b
INSTALL USING LATCH
Thread the LATCH connectors behind the seat fabric and out the side
openings on the seat back, as shown.
Loosen BOTH LATCH Adjuster straps to their full length.
Make sure the LATCH straps lay flat against the seat back (5a). If the
straps are twisted they will not move freely from side to side. Then
close the LATCH Connector Storage compartment door and replace
BOTH seat pads (5b). Make sure to re-attach both snaps on the
Backrest Seat Pad to the Armrest Fabric.
5
4
background
54
55
HARNESS INSTALLATION
HARNESS INSTALLATION
INSTALL USING LATCH
Locate the LATCH anchor bars in your vehicle. Attach both LATCH
Connectors to the vehicle LATCH anchor bars.
6
Reminder: If using Tether Strap, make sure to lay it over the seat before installing in
LATCH mode. “IF TETHER ANCHOR IS AVAILABLE IN YOUR VEHICLE - Before placing the
Child Restraint in the vehicle, remove Tether from the tether compartment. If a tether
anchor is not available, the Tether should be stored properly.”
INSTALL USING LATCH
“CLICK”
“CLICK”
6
Do not install by this
method for a child weighing
more than 40 lbs (18.1 kg).
background
54
55
HARNESS INSTALLATION
HARNESS INSTALLATION
INSTALL USING LATCH
Locate the LATCH anchor bars in your vehicle. Attach both LATCH
Connectors to the vehicle LATCH anchor bars.
6
Reminder: If using Tether Strap, make sure to lay it over the seat before installing in
LATCH mode. “IF TETHER ANCHOR IS AVAILABLE IN YOUR VEHICLE - Before placing the
Child Restraint in the vehicle, remove Tether from the tether compartment. If a tether
anchor is not available, the Tether should be stored properly.”
INSTALL USING LATCH
“CLICK”
“CLICK”
6
Do not install by this
method for a child weighing
more than 40 lbs (18.1 kg).
background
56
57
HARNESS INSTALLATION
HARNESS INSTALLATION
8
INSTALL USING LATCH
CHECK YOUR WORK
Hold Child Restraint at each side near forward-facing vehicle belt path. Pull side
to side and forward. Child Restraint should not move more than 1” (25 mm)
from vehicle seat back or side-to-side.
Make sure Bubble is between lines on label. If necessary, loosen the LATCH and
Tether Straps, re-adjust recline and repeat installation steps to make sure Child
Restraint is installed properly.
Check installation before every use!
While pushing down on the Child Restraint (7a), pull on the LATCH
Adjuster strap to tighten (7b).
Locate Tether anchor in your vehicle. Attach Tether Hook and pull Tether
Adjuster strap to tighten.
7
INSTALL USING LATCH
7a
8
7b
background
56
57
HARNESS INSTALLATION
HARNESS INSTALLATION
8
INSTALL USING LATCH
CHECK YOUR WORK
Hold Child Restraint at each side near forward-facing vehicle belt path. Pull side
to side and forward. Child Restraint should not move more than 1” (25 mm)
from vehicle seat back or side-to-side.
Make sure Bubble is between lines on label. If necessary, loosen the LATCH and
Tether Straps, re-adjust recline and repeat installation steps to make sure Child
Restraint is installed properly.
Check installation before every use!
While pushing down on the Child Restraint (7a), pull on the LATCH
Adjuster strap to tighten (7b).
Locate Tether anchor in your vehicle. Attach Tether Hook and pull Tether
Adjuster strap to tighten.
7
INSTALL USING LATCH
7a
8
7b
background
58
59
HARNESS INSTALLATION
HARNESS INSTALLATION
INSTALL USING LAP-SHOULDER BELT
1
2
INSTALL USING LAP-SHOULDER BELT
Undo the snap attaching the Armrest Fabric to the Backrest Seat Pad.
Repeat this step for the other side.
Route vehicle lap-shoulder belt through the red HARNESS MODE
seat belt path on the side of Child Restraint.
1
2
background
58
59
HARNESS INSTALLATION
HARNESS INSTALLATION
INSTALL USING LAP-SHOULDER BELT
1
2
INSTALL USING LAP-SHOULDER BELT
Undo the snap attaching the Armrest Fabric to the Backrest Seat Pad.
Repeat this step for the other side.
Route vehicle lap-shoulder belt through the red HARNESS MODE
seat belt path on the side of Child Restraint.
1
2
background
60
61
HARNESS INSTALLATION
HARNESS INSTALLATION
INSTALL USING LAP-SHOULDER BELT
43
“CLICK”
INSTALL USING LAP-SHOULDER BELT
Lift up on the Backrest Seat Pad. Pass the vehicle belt along the back
of the Child Restraint and pull the vehicle belt down through the red
HARNESS MODE seat belt path on the opposite side of the Child
Restraint.
Buckle the vehicle belt. Replace the Backrest Seat Pad, make sure to
re-attach the snaps on the Backrest Seat Pad to the Armrest Fabric.
3
4
background
60
61
HARNESS INSTALLATION
HARNESS INSTALLATION
INSTALL USING LAP-SHOULDER BELT
43
“CLICK”
INSTALL USING LAP-SHOULDER BELT
Lift up on the Backrest Seat Pad. Pass the vehicle belt along the back
of the Child Restraint and pull the vehicle belt down through the red
HARNESS MODE seat belt path on the opposite side of the Child
Restraint.
Buckle the vehicle belt. Replace the Backrest Seat Pad, make sure to
re-attach the snaps on the Backrest Seat Pad to the Armrest Fabric.
3
4
background
62
63
HARNESS INSTALLATION
HARNESS INSTALLATION
INSTALL USING LAP-SHOULDER BELT
While pushing down on the Child Restraint (5a) pull the vehicle shoulder
belt (5b) to tighten vehicle lap belt.
While still pulling the shoulder belt tight, slide the vehicle shoulder belt
into the Lock-Off. Always use the Lock-Off on the opposite side of the
vehicle belt buckle.
Locate Tether anchor in your vehicle. Attach Tether Hook. Pull Tether
Adjuster strap to tighten.
5
6
INSTALL USING LAP-SHOULDER BELT
7
CHECK YOUR WORK
Hold Child Restraint at each side near FORWARD-FACING vehicle belt path. Pull
side to side and forward. Vehicle belt should remain tight and Child Restraint
should not move more than 1” (25 mm) from vehicle seat back or side-to-side.
Make sure Bubble is between lines on label. If necessary, loosen the vehicle belt
and Tether, re-adjust recline and repeat installation steps to make sure Child
Restraint is installed properly.
Check installation before every use!
1
2
3
4
5a
5b
6
7
background
62
63
HARNESS INSTALLATION
HARNESS INSTALLATION
INSTALL USING LAP-SHOULDER BELT
While pushing down on the Child Restraint (5a) pull the vehicle shoulder
belt (5b) to tighten vehicle lap belt.
While still pulling the shoulder belt tight, slide the vehicle shoulder belt
into the Lock-Off. Always use the Lock-Off on the opposite side of the
vehicle belt buckle.
Locate Tether anchor in your vehicle. Attach Tether Hook. Pull Tether
Adjuster strap to tighten.
5
6
INSTALL USING LAP-SHOULDER BELT
7
CHECK YOUR WORK
Hold Child Restraint at each side near FORWARD-FACING vehicle belt path. Pull
side to side and forward. Vehicle belt should remain tight and Child Restraint
should not move more than 1” (25 mm) from vehicle seat back or side-to-side.
Make sure Bubble is between lines on label. If necessary, loosen the vehicle belt
and Tether, re-adjust recline and repeat installation steps to make sure Child
Restraint is installed properly.
Check installation before every use!
1
2
3
4
5a
5b
6
7
background
64
65
HARNESS INSTALLATION
HARNESS INSTALLATION
INSTALL USING LAP BELT ONLY
2
1
Undo the snap attaching the Armrest Fabric to the Backrest Seat Pad.
Repeat this step for the other side.
Route vehicle lap belt through the red HARNESS MODE seat belt
path on the side of Child Restraint.
1
INSTALL USING LAP BELT ONLY
2
background
64
65
HARNESS INSTALLATION
HARNESS INSTALLATION
INSTALL USING LAP BELT ONLY
2
1
Undo the snap attaching the Armrest Fabric to the Backrest Seat Pad.
Repeat this step for the other side.
Route vehicle lap belt through the red HARNESS MODE seat belt
path on the side of Child Restraint.
1
INSTALL USING LAP BELT ONLY
2
background
66
67
HARNESS INSTALLATION
HARNESS INSTALLATION
INSTALL USING LAP BELT ONLY
3 4
“CLICK”
Lift up on the Backrest Seat Pad. Pass the vehicle belt along the back
of the Child Restraint and pull the vehicle belt down through the red
HARNESS MODE seat belt path on the opposite side of the Child
Restraint.
Buckle the vehicle belt. Replace the Backrest Seat Pad, make sure to
re-attach the snaps on the Backrest Seat Pad to the Armrest Fabric.
3
INSTALL USING LAP BELT ONLY
4
background
66
67
HARNESS INSTALLATION
HARNESS INSTALLATION
INSTALL USING LAP BELT ONLY
3 4
“CLICK”
Lift up on the Backrest Seat Pad. Pass the vehicle belt along the back
of the Child Restraint and pull the vehicle belt down through the red
HARNESS MODE seat belt path on the opposite side of the Child
Restraint.
Buckle the vehicle belt. Replace the Backrest Seat Pad, make sure to
re-attach the snaps on the Backrest Seat Pad to the Armrest Fabric.
3
INSTALL USING LAP BELT ONLY
4
background
68
69
HARNESS INSTALLATION
HARNESS INSTALLATION
INSTALL USING LAP BELT ONLY
5a
5b
6
While pushing down on the Child Restraint (5a) pull the loose end of
the vehicle lap belt (5b) to tighten.
Locate Tether anchor in your vehicle. Attach Tether Hook. Pull Tether
Adjuster strap to tighten.
6
5
CHECK YOUR WORK
Hold Child Restraint at each side near FORWARD-FACING vehicle belt path. Pull
side to side and forward. Vehicle belt should remain tight and Child Restraint
should not move more than 1” (25 mm) from vehicle seat back or side-to-side.
Make sure Bubble is between lines on label. If necessary, loosen the vehicle belt
and Tether, re-adjust recline and repeat installation steps to make sure Child
Restraint is installed properly.
Check installation before every use!
INSTALL USING LAP BELT ONLY
background
68
69
HARNESS INSTALLATION
HARNESS INSTALLATION
INSTALL USING LAP BELT ONLY
5a
5b
6
While pushing down on the Child Restraint (5a) pull the loose end of
the vehicle lap belt (5b) to tighten.
Locate Tether anchor in your vehicle. Attach Tether Hook. Pull Tether
Adjuster strap to tighten.
6
5
CHECK YOUR WORK
Hold Child Restraint at each side near FORWARD-FACING vehicle belt path. Pull
side to side and forward. Vehicle belt should remain tight and Child Restraint
should not move more than 1” (25 mm) from vehicle seat back or side-to-side.
Make sure Bubble is between lines on label. If necessary, loosen the vehicle belt
and Tether, re-adjust recline and repeat installation steps to make sure Child
Restraint is installed properly.
Check installation before every use!
INSTALL USING LAP BELT ONLY
background
70
71
HARNESS INSTALLATION
HARNESS INSTALLATION
3
2
1
SECURING CHILD WITH HARNESS
Loosen Harness by pressing Harness Release Button on the front of the
Child Restraint and pulling out on both of the Harness Straps.
Unbuckle Harness by pressing the button on Harness Buckle and pulling
out both Buckle Tongues.
Open Chest Clip by squeezing both buttons in the middle of the clip and
pulling apart.
1
2
3
If Crotch Strap is under child, it will need to be re-positioned. Refer to
page 26 “Adjusting Crotch Strap”.
SECURING CHILD WITH HARNESS
background
70
71
HARNESS INSTALLATION
HARNESS INSTALLATION
3
2
1
SECURING CHILD WITH HARNESS
Loosen Harness by pressing Harness Release Button on the front of the
Child Restraint and pulling out on both of the Harness Straps.
Unbuckle Harness by pressing the button on Harness Buckle and pulling
out both Buckle Tongues.
Open Chest Clip by squeezing both buttons in the middle of the clip and
pulling apart.
1
2
3
If Crotch Strap is under child, it will need to be re-positioned. Refer to
page 26 “Adjusting Crotch Strap”.
SECURING CHILD WITH HARNESS
background
72
73
HARNESS INSTALLATION
HARNESS INSTALLATION
4
SECURING CHILD WITH HARNESS
Place child in Child Restraint with child’s back flat against the back of the
seat. Pull Harness Straps over the child’s shoulders and around the child’s
waist. Make sure there are no twists in Harness Strap.
4
If the child is wearing cold weather clothing, give extra attention to adjusting
the Harness - make sure the Harness Straps lie flat on the child’s shoulders, are
adjusted snugly so that the clothing is compressed and the child cannot lean
forward, and the Chest Clip is at armpit level. Clothing that interferes with the
proper placement or adjustment of the Harness system should never be used.
SECURING CHILD WITH HARNESS
background
72
73
HARNESS INSTALLATION
HARNESS INSTALLATION
4
SECURING CHILD WITH HARNESS
Place child in Child Restraint with child’s back flat against the back of the
seat. Pull Harness Straps over the child’s shoulders and around the child’s
waist. Make sure there are no twists in Harness Strap.
4
If the child is wearing cold weather clothing, give extra attention to adjusting
the Harness - make sure the Harness Straps lie flat on the child’s shoulders, are
adjusted snugly so that the clothing is compressed and the child cannot lean
forward, and the Chest Clip is at armpit level. Clothing that interferes with the
proper placement or adjustment of the Harness system should never be used.
SECURING CHILD WITH HARNESS
background
74
75
HARNESS INSTALLATION
HARNESS INSTALLATION
5
*
*
AT OR ABOVE
SECURING CHILD WITH HARNESS
Adjust Harness Strap height position up or down by pulling up on
the Headrest Adjustment Tab on the back of the Child Restraint and
moving the Headrest up or down. Position the Harness Straps at or
just above the child’s shoulders.
Make sure Headrest locks into position before tightening Harness.
5
SECURING CHILD WITH HARNESS
Harness may need to be loosened to move the Headrest up.
background
74
75
HARNESS INSTALLATION
HARNESS INSTALLATION
5
*
*
AT OR ABOVE
SECURING CHILD WITH HARNESS
Adjust Harness Strap height position up or down by pulling up on
the Headrest Adjustment Tab on the back of the Child Restraint and
moving the Headrest up or down. Position the Harness Straps at or
just above the child’s shoulders.
Make sure Headrest locks into position before tightening Harness.
5
SECURING CHILD WITH HARNESS
Harness may need to be loosened to move the Headrest up.
background
76
77
HARNESS INSTALLATION
HARNESS INSTALLATION
“CLICK”
6b
6a
SECURING CHILD WITH HARNESS
Insert each Buckle Tongue into Harness Buckle; listen for a click (6a).
Pull up firmly on both Buckle Tongues to make sure that they are
securely latched (6b).
6
SECURING CHILD WITH HARNESS
background
76
77
HARNESS INSTALLATION
HARNESS INSTALLATION
“CLICK”
6b
6a
SECURING CHILD WITH HARNESS
Insert each Buckle Tongue into Harness Buckle; listen for a click (6a).
Pull up firmly on both Buckle Tongues to make sure that they are
securely latched (6b).
6
SECURING CHILD WITH HARNESS
background
78
79
HARNESS INSTALLATION
HARNESS INSTALLATION
“CLICK”
7 8
SECURING CHILD WITH HARNESS
Fasten Chest Clip by snapping both sides together; listen for a click.
Push Chest Clip, Chest Clip Pads and Shoulder Pads down away from
the child’s neck and towards the Harness Buckle. Remove slack from
the waist strap and pull up on both shoulder straps.
7
8
SECURING CHILD WITH HARNESS
WARNING - Chest Clip Pads must always be used in HARNESS
MODE. Damaged or removed Chest Clip Pads could result in serious
injury or death.
background
78
79
HARNESS INSTALLATION
HARNESS INSTALLATION
“CLICK”
7 8
SECURING CHILD WITH HARNESS
Fasten Chest Clip by snapping both sides together; listen for a click.
Push Chest Clip, Chest Clip Pads and Shoulder Pads down away from
the child’s neck and towards the Harness Buckle. Remove slack from
the waist strap and pull up on both shoulder straps.
7
8
SECURING CHILD WITH HARNESS
WARNING - Chest Clip Pads must always be used in HARNESS
MODE. Damaged or removed Chest Clip Pads could result in serious
injury or death.
background
80
81
HARNESS INSTALLATION
HARNESS INSTALLATION
9a 10
9b
SECURING CHILD WITH HARNESS
Tighten the harness by pulling slowly on Harness Adjustment Strap until
the harness is snug on child (9a). If you can pinch a fold in the strap at
the child’s shoulders, harness is too loose (9b). If the harness is too loose
pull the Harness Adjuster strap more.
Move the Shoulder Pads up to the child’s shoulders. Slide Chest Clip and
Chest Clip Pads up to center of child’s chest, level with the armpits.
9
10
WARNING - If harness is not snug around your child, child could be
ejected in a sudden stop or crash resulting in serious injury or death.
SECURING CHILD WITH HARNESS
background
80
81
HARNESS INSTALLATION
HARNESS INSTALLATION
9a 10
9b
SECURING CHILD WITH HARNESS
Tighten the harness by pulling slowly on Harness Adjustment Strap until
the harness is snug on child (9a). If you can pinch a fold in the strap at
the child’s shoulders, harness is too loose (9b). If the harness is too loose
pull the Harness Adjuster strap more.
Move the Shoulder Pads up to the child’s shoulders. Slide Chest Clip and
Chest Clip Pads up to center of child’s chest, level with the armpits.
9
10
WARNING - If harness is not snug around your child, child could be
ejected in a sudden stop or crash resulting in serious injury or death.
SECURING CHILD WITH HARNESS
background
82
83
SECURING YOUR CHILD
SECURING YOUR CHILD
Check the position of Chest Clip: Chest Clip should be centered on the child’s chest, level
with the armpits.
Never secure child in Child Restraint with child dressed in bulky garments or heavy clothing.
Heavy clothing can prevent harness from being properly tightened around child.
Never secure child in Child Restraint with child wrapped in a blanket. To keep child warm,
place a blanket over child AFTER you have properly secured and tightened harness around
child.
WARNING - If harness is not snug around your child, child could be
ejected in a sudden stop or crash resulting in serious injury or death.
SECURING CHILD CHECKLIST
Harness Straps must be snug. If you can pinch a fold in the strap, the harness is too loose. A
snug strap should not allow any slack. It lies in a relatively straight line without sagging. It
does not press on the child’s flesh or push the child’s body into an unnatural position.
Straps must lay flat, free of twists and centered on top of the child’s shoulders.
Check the height of the Harness Straps: Make sure to position the Harness Straps at or
above the child’s shoulders.
*
*
AT OR ABOVE
SECURING CHILD CHECKLIST
background
82
83
SECURING YOUR CHILD
SECURING YOUR CHILD
Check the position of Chest Clip: Chest Clip should be centered on the child’s chest, level
with the armpits.
Never secure child in Child Restraint with child dressed in bulky garments or heavy clothing.
Heavy clothing can prevent harness from being properly tightened around child.
Never secure child in Child Restraint with child wrapped in a blanket. To keep child warm,
place a blanket over child AFTER you have properly secured and tightened harness around
child.
WARNING - If harness is not snug around your child, child could be
ejected in a sudden stop or crash resulting in serious injury or death.
SECURING CHILD CHECKLIST
Harness Straps must be snug. If you can pinch a fold in the strap, the harness is too loose. A
snug strap should not allow any slack. It lies in a relatively straight line without sagging. It
does not press on the child’s flesh or push the child’s body into an unnatural position.
Straps must lay flat, free of twists and centered on top of the child’s shoulders.
Check the height of the Harness Straps: Make sure to position the Harness Straps at or
above the child’s shoulders.
*
*
AT OR ABOVE
SECURING CHILD CHECKLIST
background
84
85
BOOSTER INSTALLATION
BOOSTER INSTALLATION
BOOSTER SETUP
1
Completely loosen Harness by pressing Harness Release Button on
the front of the Child Restraint and pulling out on both of the Harness
Straps as far as possible. Then unbuckle the Chest Clip and Harness
Buckle.
Unhook BOTH elastic straps on the back of the Child Restraint.
BOOSTER SETUP
1
Store the Harness Straps and Crotch Strap properly when using the Child
Restraint in BOOSTER MODE.
2
2
background
84
85
BOOSTER INSTALLATION
BOOSTER INSTALLATION
BOOSTER SETUP
1
Completely loosen Harness by pressing Harness Release Button on
the front of the Child Restraint and pulling out on both of the Harness
Straps as far as possible. Then unbuckle the Chest Clip and Harness
Buckle.
Unhook BOTH elastic straps on the back of the Child Restraint.
BOOSTER SETUP
1
Store the Harness Straps and Crotch Strap properly when using the Child
Restraint in BOOSTER MODE.
2
2
background
86
87
BOOSTER INSTALLATION
BOOSTER INSTALLATION
Pull the fabric out from the groove around the Child Restraint. Repeat
for the other side.
Unhook the elastic strap from the side hook (4a) and the top hook
(4b) located near the vehicle belt path. Repeat for the other side.
BOOSTER SETUP
3
BOOSTER SETUP
4
3
4a
4b
background
86
87
BOOSTER INSTALLATION
BOOSTER INSTALLATION
Pull the fabric out from the groove around the Child Restraint. Repeat
for the other side.
Unhook the elastic strap from the side hook (4a) and the top hook
(4b) located near the vehicle belt path. Repeat for the other side.
BOOSTER SETUP
3
BOOSTER SETUP
4
3
4a
4b
background
88
89
BOOSTER INSTALLATION
BOOSTER INSTALLATION
5
BOOSTER SETUP
7
6
Undo the snap attaching the Armrest Fabric to the Backrest Seat Pad.
Repeat this step for the other side.
Remove the Backrest Seat Pad from the Child Restraint.
Lift up on the Headrest Pad, as shown.
5
BOOSTER SETUP
6
7
background
88
89
BOOSTER INSTALLATION
BOOSTER INSTALLATION
5
BOOSTER SETUP
7
6
Undo the snap attaching the Armrest Fabric to the Backrest Seat Pad.
Repeat this step for the other side.
Remove the Backrest Seat Pad from the Child Restraint.
Lift up on the Headrest Pad, as shown.
5
BOOSTER SETUP
6
7
background
90
91
BOOSTER INSTALLATION
BOOSTER INSTALLATION
8
BOOSTER SETUP
9
Connect the Chest Clip together and slide it down to the buckle
tongues. Insert the Chest Clip and the buckle tongues into the
compartment at the bottom of the Seat Back.
Remove the Shoulder Pads and store them in the compartment for
later use.
8
BOOSTER SETUP
9
background
90
91
BOOSTER INSTALLATION
BOOSTER INSTALLATION
8
BOOSTER SETUP
9
Connect the Chest Clip together and slide it down to the buckle
tongues. Insert the Chest Clip and the buckle tongues into the
compartment at the bottom of the Seat Back.
Remove the Shoulder Pads and store them in the compartment for
later use.
8
BOOSTER SETUP
9
background
92
93
BOOSTER INSTALLATION
BOOSTER INSTALLATION
11
BOOSTER SETUP
10a
10c
10b
Remove the Crotch Strap Pad by pushing the fabric Tab through the
slot on the BACK of the Harness Buckle (10a). Then pull Tab out of
the FRONT (10b) and remove Crotch Strap Pad (10c).
Thread the Crotch Strap through the slot in the seat pad and pull
forward on the Seat Bottom pad to locate the Crotch Strap
compartment.
10
BOOSTER SETUP
11
background
92
93
BOOSTER INSTALLATION
BOOSTER INSTALLATION
11
BOOSTER SETUP
10a
10c
10b
Remove the Crotch Strap Pad by pushing the fabric Tab through the
slot on the BACK of the Harness Buckle (10a). Then pull Tab out of
the FRONT (10b) and remove Crotch Strap Pad (10c).
Thread the Crotch Strap through the slot in the seat pad and pull
forward on the Seat Bottom pad to locate the Crotch Strap
compartment.
10
BOOSTER SETUP
11
background
94
95
BOOSTER INSTALLATION
BOOSTER INSTALLATION
13
BOOSTER SETUP
14
12
12a
To Store the Crotch Strap, fit the Crotch Strap buckle into the Crotch
Strap compartment, which is located next to the crotch strap
adjustment slots in the seat base (12a).
Repeat Booster Setup Steps 2-6 (on pages 84-88) in REVERSE to
re-attach the Backrest Seat Pad.
Reposition the Headrest Pad, as shown.
12
BOOSTER SETUP
13
14
background
94
95
BOOSTER INSTALLATION
BOOSTER INSTALLATION
13
BOOSTER SETUP
14
12
12a
To Store the Crotch Strap, fit the Crotch Strap buckle into the Crotch
Strap compartment, which is located next to the crotch strap
adjustment slots in the seat base (12a).
Repeat Booster Setup Steps 2-6 (on pages 84-88) in REVERSE to
re-attach the Backrest Seat Pad.
Reposition the Headrest Pad, as shown.
12
BOOSTER SETUP
13
14
background
96
97
BOOSTER INSTALLATION
BOOSTER INSTALLATION
See page 35 for “Vehicle Seating Positions” before installing. Make sure
the vehicle is on a level surface, if possible.
Place the Booster on the vehicle seat making sure the installation lines
(located on the Seat Base) are PARALLEL with the vehicle seating
surface.
Check that the headrest of the vehicle seat does not interfere with the
Headrest of the Booster.
If the vehicle headrest pushes the Child Restraint forward, check your
vehicle owner’s manual to see if the headrest removal is permitted. If so,
follow the vehicle owner’s manual to remove the headrest. If it is not
permitted, raise the vehicle headrest or move the Child Restraint to a
different vehicle seating location.
BOOSTER INSTALLATION
BOOSTER INSTALLATION
2
1
BOOSTER INSTALLATION
3
3
LEVEL
SLO PE
Installation
Lines
Vehicle
Seating
Surface
2
background
96
97
BOOSTER INSTALLATION
BOOSTER INSTALLATION
See page 35 for “Vehicle Seating Positions” before installing. Make sure
the vehicle is on a level surface, if possible.
Place the Booster on the vehicle seat making sure the installation lines
(located on the Seat Base) are PARALLEL with the vehicle seating
surface.
Check that the headrest of the vehicle seat does not interfere with the
Headrest of the Booster.
If the vehicle headrest pushes the Child Restraint forward, check your
vehicle owner’s manual to see if the headrest removal is permitted. If so,
follow the vehicle owner’s manual to remove the headrest. If it is not
permitted, raise the vehicle headrest or move the Child Restraint to a
different vehicle seating location.
BOOSTER INSTALLATION
BOOSTER INSTALLATION
2
1
BOOSTER INSTALLATION
3
3
LEVEL
SLO PE
Installation
Lines
Vehicle
Seating
Surface
2
background
98
99
BOOSTER INSTALLATION
BOOSTER INSTALLATION
4
4
L E V E L
SLO P E
L E V E L
SLO P E
Make sure the Child Restraint is not blocking the vehicle belt buckle.
4
BOOSTER INSTALLATION
BOOSTER INSTALLATIONBOOSTER INSTALLATION
Installation on a Level Surface: Locate the Bubble Level Indicator
label and re-adjust the seat recline to any position that the Bubble
falls between the lines.
Installation on a Slope: If vehicle is on a slope, re-adjust the seat
recline to position 3 or 4 only.
L E V E L
SLO PE
L E V E L
SLO PE
1
2
3
4
background
98
99
BOOSTER INSTALLATION
BOOSTER INSTALLATION
4
4
L E V E L
SLO P E
L E V E L
SLO P E
Make sure the Child Restraint is not blocking the vehicle belt buckle.
4
BOOSTER INSTALLATION
BOOSTER INSTALLATIONBOOSTER INSTALLATION
Installation on a Level Surface: Locate the Bubble Level Indicator
label and re-adjust the seat recline to any position that the Bubble
falls between the lines.
Installation on a Slope: If vehicle is on a slope, re-adjust the seat
recline to position 3 or 4 only.
L E V E L
SLO PE
L E V E L
SLO PE
1
2
3
4
background
100
101
BOOSTER INSTALLATION
BOOSTER INSTALLATION
“CLICK”
“CLICK”
5
BOOSTER INSTALLATION
If using LATCH, locate the LATCH Connector Storage compartment and
remove LATCH straps. Make sure LATCH Adjuster strap is loosened to its full
length.
See page 50-53
.
Locate the LATCH anchor bars in your vehicle. Attach both LATCH
Connectors to the vehicle LATCH anchor bars and pull tight.
Locate the Tether, attach to Tether anchor bar, and pull tight.
Use of LATCH and Top Tether in BOOSTER MODE is completely optional. If LATCH and
or Tether is not used, make sure the LATCH Straps are properly stored. See page 20.
5
6
BOOSTER INSTALLATION
If the seat is not secured with both the LATCH anchors and Top Tether, the seat
must be secured with the vehicle Lap-Shoulder belt when not in use.
6
background
100
101
BOOSTER INSTALLATION
BOOSTER INSTALLATION
“CLICK”
“CLICK”
5
BOOSTER INSTALLATION
If using LATCH, locate the LATCH Connector Storage compartment and
remove LATCH straps. Make sure LATCH Adjuster strap is loosened to its full
length.
See page 50-53
.
Locate the LATCH anchor bars in your vehicle. Attach both LATCH
Connectors to the vehicle LATCH anchor bars and pull tight.
Locate the Tether, attach to Tether anchor bar, and pull tight.
Use of LATCH and Top Tether in BOOSTER MODE is completely optional. If LATCH and
or Tether is not used, make sure the LATCH Straps are properly stored. See page 20.
5
6
BOOSTER INSTALLATION
If the seat is not secured with both the LATCH anchors and Top Tether, the seat
must be secured with the vehicle Lap-Shoulder belt when not in use.
6
background
102
103
BOOSTER INSTALLATION
BOOSTER INSTALLATION
SECURING CHILD IN BOOSTER
1
2
SECURING CHILD IN BOOSTER
Place the child into the Child Restraint, making sure the child is sitting
with his/her back against the Backrest.
The Shoulder Belt guide must be positioned at or just slightly above the
child’s shoulders, If not adjust the Headrest to the proper height.
See
page 28 for adjusting the Headrest Height.
1
2
background
102
103
BOOSTER INSTALLATION
BOOSTER INSTALLATION
SECURING CHILD IN BOOSTER
1
2
SECURING CHILD IN BOOSTER
Place the child into the Child Restraint, making sure the child is sitting
with his/her back against the Backrest.
The Shoulder Belt guide must be positioned at or just slightly above the
child’s shoulders, If not adjust the Headrest to the proper height.
See
page 28 for adjusting the Headrest Height.
1
2
background
104
105
BOOSTER INSTALLATION
BOOSTER INSTALLATION
43
SECURING CHILD IN BOOSTER
“CLICK”
Route the lap belt UNDER the 1st Armrest and across the child’s
thighs. Then route the shoulder belt and the lap belt UNDER the 2nd
Armrest closest to the vehicle buckle, as shown.
Buckle the vehicle belt.
3
4
SECURING CHILD IN BOOSTER
background
104
105
BOOSTER INSTALLATION
BOOSTER INSTALLATION
43
SECURING CHILD IN BOOSTER
“CLICK”
Route the lap belt UNDER the 1st Armrest and across the child’s
thighs. Then route the shoulder belt and the lap belt UNDER the 2nd
Armrest closest to the vehicle buckle, as shown.
Buckle the vehicle belt.
3
4
SECURING CHILD IN BOOSTER
background
106
107
BOOSTER INSTALLATION
BOOSTER INSTALLATION
SECURING CHILD IN BOOSTER
Slide the shoulder belt between the Headrest and the side of the Seat
back (5a). Thread the shoulder belt through the orange Shoulder Belt
Guide (5b), located at the bottom of the headrest. Make sure the
Shoulder belt lays flat and is not twisted (5c).
5
The seat belt can remain in the Shoulder Belt Clip until the seat is removed
from the vehicle.
SECURING CHILD IN BOOSTER
Ensure the child is secured correctly, as shown.
6
Check that the shoulder belt is snug on the child’s shoulder and that it does
not rub on the neck. It should lie flat across the child’s chest and middle
of shoulder. The Shoulder Belt Guide should never be below the child’s
shoulder. If necessary, adjust the Child Restraint Headrest to achieve a
proper fit.
5a
5c
5b
6
background
106
107
BOOSTER INSTALLATION
BOOSTER INSTALLATION
SECURING CHILD IN BOOSTER
Slide the shoulder belt between the Headrest and the side of the Seat
back (5a). Thread the shoulder belt through the orange Shoulder Belt
Guide (5b), located at the bottom of the headrest. Make sure the
Shoulder belt lays flat and is not twisted (5c).
5
The seat belt can remain in the Shoulder Belt Clip until the seat is removed
from the vehicle.
SECURING CHILD IN BOOSTER
Ensure the child is secured correctly, as shown.
6
Check that the shoulder belt is snug on the child’s shoulder and that it does
not rub on the neck. It should lie flat across the child’s chest and middle
of shoulder. The Shoulder Belt Guide should never be below the child’s
shoulder. If necessary, adjust the Child Restraint Headrest to achieve a
proper fit.
5a
5c
5b
6
background
108
109
BOOSTER INSTALLATION
BOOSTER INSTALLATION
CONVERT TO HARNESS MODE
2
CONVERT TO HARNESS MODE
To convert the Booster Mode back to Harness Mode, remove the Backrest
Seat Pad and lift the Headrest Pad. (Refer to pages 84-89 and complete
steps 2-6)
Lift up on the Harness Straps and slide out the Chest Clips first, followed
by the Buckle tongues.
Lift the Backrest Seat Pad and insert the Crotch Strap into the
appropriate opening and then press the padding into place. Make sure
the Harness Straps are arranged into the Seat Pad Grooves. Re-attach the
Shoulder Pads.
Replace the Backrest Seat Pad by following step on page 84-89 in
REVERSE.
1
2
3
Seat Pad
Groove
Seat Pad
Groove
background
108
109
BOOSTER INSTALLATION
BOOSTER INSTALLATION
CONVERT TO HARNESS MODE
2
CONVERT TO HARNESS MODE
To convert the Booster Mode back to Harness Mode, remove the Backrest
Seat Pad and lift the Headrest Pad. (Refer to pages 84-89 and complete
steps 2-6)
Lift up on the Harness Straps and slide out the Chest Clips first, followed
by the Buckle tongues.
Lift the Backrest Seat Pad and insert the Crotch Strap into the
appropriate opening and then press the padding into place. Make sure
the Harness Straps are arranged into the Seat Pad Grooves. Re-attach the
Shoulder Pads.
Replace the Backrest Seat Pad by following step on page 84-89 in
REVERSE.
1
2
3
Seat Pad
Groove
Seat Pad
Groove
background
110
111
SECURING YOUR CHILD
SECURING YOUR CHILD
Slide the shoulder belt through the orange Shoulder Belt Guide.
Do not let your child slide forward or downward while in the Booster.
Never use the vehicle belt in any position other than those indicated in this User Guide!
SECURING CHILD CHECKLIST
To avoid injury to others, ALWAYS secure this child restraint in BOOSTER
mode when unoccupied. An unsecured Booster Seat could injure other
occupants in a sudden stop or crash.
Always secure the unoccupied BOOSTER with either LATCH system (see page 100) or with
the vehicle belt by following the “Securing Child in BOOSTER” instructions, see page 104.
Check that the seat belt is not twisted.
ALWAYS check to make sure vehicle seat belt is securely buckled. If buckle
separates, child could be killed or seriously injured.
DO NOT use anything (pillows, blankets, etc.) between the Booster and the vehicle
seat or between the child and the Booster. Avoid bulky clothing that interferes with proper
seat belt placement. In the event of an accident, the Booster may not operate correctly.
SECURING CHILD CHECKLIST
background
110
111
SECURING YOUR CHILD
SECURING YOUR CHILD
Slide the shoulder belt through the orange Shoulder Belt Guide.
Do not let your child slide forward or downward while in the Booster.
Never use the vehicle belt in any position other than those indicated in this User Guide!
SECURING CHILD CHECKLIST
To avoid injury to others, ALWAYS secure this child restraint in BOOSTER
mode when unoccupied. An unsecured Booster Seat could injure other
occupants in a sudden stop or crash.
Always secure the unoccupied BOOSTER with either LATCH system (see page 100) or with
the vehicle belt by following the “Securing Child in BOOSTER” instructions, see page 104.
Check that the seat belt is not twisted.
ALWAYS check to make sure vehicle seat belt is securely buckled. If buckle
separates, child could be killed or seriously injured.
DO NOT use anything (pillows, blankets, etc.) between the Booster and the vehicle
seat or between the child and the Booster. Avoid bulky clothing that interferes with proper
seat belt placement. In the event of an accident, the Booster may not operate correctly.
SECURING CHILD CHECKLIST
background
ADDITIONAL INFORMATION
112
113
ADDITIONAL INFORMATION
INSTALLATION ON AN AIRCRAFTINSTALLATION ON AN AIRCRAFT
• This Child Restraint is certified for use on aircraft, in HARNESS MODE ONLY.
Contact the airline prior to travel to discuss their Child Restraint policy.
• Use this Child Restraint only on FORWARD-FACING aircraft seats.
When traveling by airplane with your child, Chicco recommends taking
the Child Restraint on the airplane with you so that you can use it with
your child. Not only will it protect your child during take-off, landing, and
turbulence, but also allow your child to be more comfortable.
• Install Child Restraint on an aircraft the same way it is installed in a vehicle
when using a vehicle lap belt. Reference Lap belt install in Harness Mode on
page 66.
BOOSTER MODE is NOT certified for use on aircraft. Aircrafts do not
have lap-shoulder belts to secure your child.
background
ADDITIONAL INFORMATION
112
113
ADDITIONAL INFORMATION
INSTALLATION ON AN AIRCRAFTINSTALLATION ON AN AIRCRAFT
• This Child Restraint is certified for use on aircraft, in HARNESS MODE ONLY.
Contact the airline prior to travel to discuss their Child Restraint policy.
• Use this Child Restraint only on FORWARD-FACING aircraft seats.
When traveling by airplane with your child, Chicco recommends taking
the Child Restraint on the airplane with you so that you can use it with
your child. Not only will it protect your child during take-off, landing, and
turbulence, but also allow your child to be more comfortable.
• Install Child Restraint on an aircraft the same way it is installed in a vehicle
when using a vehicle lap belt. Reference Lap belt install in Harness Mode on
page 66.
BOOSTER MODE is NOT certified for use on aircraft. Aircrafts do not
have lap-shoulder belts to secure your child.
background
ADDITIONAL INFORMATION
114
115
ADDITIONAL INFORMATION
• Cleaning Harness:
Sponge clean using warm water and soap. Air dry.
Do NOT machine wash.
• Cleaning LATCH and Adjuster Straps:
Sponge clean using warm water only. Air dry.
• Cleaning Buckle and LATCH Hardware:
Sponge clean, using warm water only. If debris is in
buckle, remove and rinse in warm cup of water only.
Air dry.
CLEANING AND MAINTENANCE
DO NOT USE Child Restraint if any part of the harness is damaged. For
proper removal and installation of the harness straps visit the Chicco website
at www.chiccousa.com or call 1-877-424-4226.
DO NOT USE BLEACH, solvents or household cleaners as they may
weaken plastics and straps.
DO NOT USE SOAPS OR LUBRICANTS on Harness Adjuster Strap,
Buckle, and LATCH hardware. It may cause them to malfunction.
• Cleaning Softgoods:
Hand wash using mild soap and water, or machine washed in cold
water on delicate cycle using mild detergent. Hang to dry.
• Cleaning Shoulder Pads:
Hand wash using mild soap and water. Hang to dry.
• Cleaning Plastics:
Sponge clean using warm water and mild soap. Towel dry.
• Cleaning Cup Holders:
Cup Holder is dishwasher safe on top rack only.
CLEANING AND MAINTENANCE
NEVER use Child Restraint without the seat pad.
Do NOT remove Adjuster straps. For additional information visit the Chicco
website at www.chiccousa.com or call 1-877-424-4226.
background
ADDITIONAL INFORMATION
114
115
ADDITIONAL INFORMATION
• Cleaning Harness:
Sponge clean using warm water and soap. Air dry.
Do NOT machine wash.
• Cleaning LATCH and Adjuster Straps:
Sponge clean using warm water only. Air dry.
• Cleaning Buckle and LATCH Hardware:
Sponge clean, using warm water only. If debris is in
buckle, remove and rinse in warm cup of water only.
Air dry.
CLEANING AND MAINTENANCE
DO NOT USE Child Restraint if any part of the harness is damaged. For
proper removal and installation of the harness straps visit the Chicco website
at www.chiccousa.com or call 1-877-424-4226.
DO NOT USE BLEACH, solvents or household cleaners as they may
weaken plastics and straps.
DO NOT USE SOAPS OR LUBRICANTS on Harness Adjuster Strap,
Buckle, and LATCH hardware. It may cause them to malfunction.
• Cleaning Softgoods:
Hand wash using mild soap and water, or machine washed in cold
water on delicate cycle using mild detergent. Hang to dry.
• Cleaning Shoulder Pads:
Hand wash using mild soap and water. Hang to dry.
• Cleaning Plastics:
Sponge clean using warm water and mild soap. Towel dry.
• Cleaning Cup Holders:
Cup Holder is dishwasher safe on top rack only.
CLEANING AND MAINTENANCE
NEVER use Child Restraint without the seat pad.
Do NOT remove Adjuster straps. For additional information visit the Chicco
website at www.chiccousa.com or call 1-877-424-4226.
background

Specifications

BRITAX E1C269H Questions and Answers

Find answers or ask new question.
See other models: E1C233EDI E1C233DDI E1C233JDI E1C239T E1C233C
Questions and Answers