Loading ...
Loading ...
Loading ...
Programming
52
You can adapt the programming of the
cooktop to your personal needs. Sev-
eral settings can be changed in succes-
sion.
After accessing programming mode,
the symbol appears and will ap-
pear in the timer display. After a few
seconds :(Program01) will flash al-
ternately with :(Code) in the timer
display.
Changing the programming
Accessing programming mode
The sensor control is located ap-
prox. 1cm (index finger width) to the
left of the sensor control.
With the cooktop turned off, touch
and hold the and sensor con-
trols together until the symbol
lights up and appears in the timer
display.
Setting the program
For a two-digit program number you
first need to set the tens position.
While the program is visible in the
display (e.g.,:), touch thesen-
sor control repeatedly until the num-
ber for the program you want appears
in the display or touch the appropri-
ate number on the numerical display.
Setting the code
While the code is visible in the display
(e.g.,:), touch thesensor con-
trol repeatedly until the number for
the code you want appears in the dis-
play or touch the appropriate number
on the numerical display.
Saving the settings
While the program is visible in the
display (e.g.,:), touch the sen-
sor control until the indicators go out.
To avoid saving the settings
While the code is showing in the dis-
play (e.g.,:), touch the sensor
control until the indicators go out.
Loading ...
Loading ...
Loading ...