Loading ...
Loading ...
Loading ...
DOWNROD-STYLE FAN MOUNTING
If you cut back the lead wires in Step 4, strip 3/4
in. of insulation from end of of each wire -- white,
black, green and blue (if applicable). Twist
stripped ends of each strand of wire within the
insulation with pliers (not included).
5
5.
6.
Remove canopy cover from bottom of canopy (B).
[NOTE: It may be necessary to use the handle
end of a screwdriver (not included) to remove the
canopy cover by tapping gently on the canopy
cover from the inside of the canopy (B).]
NOTE: The downrod (A) and canopy cover are
not used in this type of installation.
CLOSEMOUNT-STYLE FAN MOUNTING
1.
9
C
Slot
Tab
6
A
Canopy
Cover
B
1
B
Install ball end of downrod (A) into opening of
mounting bracket (C). Align slot in ball with tab in
mounting bracket (C).
DANGER: Failure to align slot in ball with tab
may cause the fan to wobble or fall, which could
result in serious injury or death.
Continue to WIRING on page 11.
Loading ...
Loading ...
Loading ...