Loading ...
Loading ...
Loading ...
FINAL INSTALLATION
5
Attach pull chain extension (DD) or a custom
pull chain extension (not included) to the fan pull
chain.
5.
E
1
OPERATING INSTRUCTIONS
The pull chain has four positions to control fan
speed. One pull is HIGH, two is MEDIUM, three
is LOW and four turns the fan OFF.
1.
Partially loosen two switch housing screws (M)
from motor plate on underside of the motor
housing (D) and remove the other switch housing
screw (M). Connect male plug from motor housing
(D) to female plug from switch housing (N),
matching up the colors on the plugs for the correct
fit. Make sure plugs connect tightly.
Carefully arrange wires inside switch housing (N).
Align slotted holes in switch housing (N) with
loosened switch housing screws (M) in motor
plate. Twist switch housing (N) to lock. Re-insert
the previously removed switch housing screw (M)
and tighten all switch housing screws (M)
securely.
Note: Make sure to align gap on motor plate with
the reverse switch on switch housing (N) for
correct fit.
4.
13
4
N
M
M
M
D
Motor
Plate
Male Plug
Female
Plug
Slotted
Hole
Hardware Used
Pull Chain Extension
x 1
DD
Loading ...
Loading ...
Loading ...