Loading ...
Loading ...
Loading ...
3.
Locate previously removed motor screws/lock
washers (H) (Step 5, page 7).
Insert two motor screws/lock washers (H) through
one blade arm (G) to attach blade arm (G) to
motor. Tighten motor screws/lock washers (H)
securely. Repeat with remaining blade arms (G),
making sure to completely secure each blade arm
(G) before proceeding with the next.
NOTE: If you purchased a compatible light kit, refer
to the instructions provided with the light kit to
complete your installation.
12
1.
Temporarily lift canopy (B) to mounting bracket (C)
to determine which two canopy mounting screws
(J) in mounting bracket (C) align with slotted holes
in canopy (B) and partially loosen these two
canopy mounting screws (J). Remove the other
two canopy mounting screws (J) along with star
washers (E). Now, lift canopy (B) to mounting
bracket (C) again, aligning slotted holes in canopy
(B) with loosened canopy mounting screws (J) in
mounting bracket (C). Twist canopy (B) clockwise
to lock. Re-insert the two canopy mounting screws
(J), along with star washers (E), that were just
removed and tighten all canopy mounting screws
(J) securely.
FINAL INSTALLATION
1
B
D
J
J
D
B
Downrod
Option
Closemount
Option
G
3
D
H
F
2.
DANGER: To reduce the risk of serious
bodily injury, DO NOT use power tools to
assemble the blades (F). If screws are
overtightened, blades (F) may crack and break.
Partially insert three blade screws (AA) along
with three fiber blade washers (BB) into holes
in blade (F) to attach blade arm (G) to blade
(F). Then, tighten each blade screw (AA)
starting with the one in the middle.
Repeat for remaining blades (F) and blade
arms (G).
2
F
G
BB
AA
Hardware Used
Blade Screw
x 15
AA
Fiber Blade Washer
x 15
BB
Loading ...
Loading ...
Loading ...