Loading ...
Loading ...
Loading ...
Owner’s Guide & Installation Instructions
85 / English
Troubleshooting
Problem Reason Solution
Laundry remains
wet at the end of
the programme.
(*)
Excessive foam might have
occurred and automatic foam
absorption system might have
been activated due to too
much detergent.
* Use the recommended
amount of detergent.
Unbalance detection due to
small amount of laundry inside
the drum and/or uneven load
distribution.
* Add more laundry (e.g. a
few additional towels) to the
drum and start a “Spin” or
“Spin&Drain” cycle.
Poor spinning results due to
not using HE detergent / using
excessive amount of detergent
* Use proper amount of HE
detergent.
Washer fills with
water when
a process is
cancelled.
There may be hot water inside
washer.
* For safety reasons, water
should be cycled in and out
a couple times.
Time delay
function does
not work.
Door may not be closed
properly.
* Close the loading door.
The door will not
lock/door led
remains OFF.
Door is not properly closed/
Door hinge is not aligned with
lock switch.
* Check for excessive laundry
avoiding the door to be
closed. Push and/or shut the
loading door firmly until it is
properly closed.
Clothes get
tangled up too
much in the
drum when
washing.
Excessive laundry might have
been loaded in.
* Do not load the washer in
excess.
Washing many items of the
same type or size of clothes
together.
* Load the wash drum with
items of different sizes.
Load is wrinkled.
Delay in unloading the washer.
* Unload the washer as soon
as the wash cycle ends.
Wrong program cycle might
have been selected.
* Select the proper program
cycle for the laundry to
be washed (See “Laundry
Tips” & “Program Cycle
Selection”).
Excessive laundry might have
been loaded in.
* Do not load the washer in
excess.
Loading ...
Loading ...
Loading ...