Loading ...
Loading ...
Loading ...
16 / English
Front-Loading Automatic Washer
Installation Instructions
Allowable Clearances for Closet Installation
When installed in closet (washer only/washer dryer stacked) :
Sides, Rear, Front 1/2 in. (1.27 cm), Top= 1 in. (2.54 cm)
Closet door ventilation requirement: A louver having minimum 23 in2 (148
cm2) air opening located at 3 in (7.62 cm) from the bottom of closet door.
Stacked Installation
You can stack your Beko washer and dryer by using a special
stacking kit. If necessary, consult your dealer or technical service
for supplying the stack kit. In stacked closet installation, following
configuration is necessary:
A louver having minimum 23 in2 (148 cm2) air opening located at 3
in (7.62 cm) height from the bottom of closet door (for washer) & A
louver of minimum 46 in2 (297 cm2) air opening located at 3 in (7.62
cm) distance from the top of closet door (for dryer).
Assembly of bottom panel covers
In order to increase the sound comfort of the product, attach cover A
after removing the package foam.
Cover A
Tilt the machine back slightly. Rest the tabs of Cover A against the
lower panel. Complete the assembly by rotating the cover.
Cover B and the Cap are optional. If available, attach cover B and the Cap.
Cover B
Rest the tabs of Cover B against the lower panel. Complete the
assembly by rotating the cover.
Loading ...
Loading ...
Loading ...