Loading ...
Loading ...
Loading ...
08 EN EN 09
D E
F
Keep RoboVac away from wet areas during cleaning.
RoboVac may climb on top of objects less than 0.63 in / 16 mm in
height. Remove these objects if possible.
Anti-drop sensors will prevent RoboVac from tumbling down stairs
and steep drops in most cases. Sensors are less effective if dirty or
used on carpeted, reflective, or dark-colored floors. Place physical
barriers to block off areas where RoboVac may fall.
Preparation
1
Remove the foam blocks beside the bumper
before use.
2
Install the side brush before use.
3
Turn on the main power switch on the right
side of RoboVac.
4
Install the Charging Base in a location that
RoboVac can easily access. Place it against
a wall, and on a hard, level surface rather
than on rugs or carpets
.
5
Remove objects within 3 ft/1 m to the left
and right sides and within 6 ft / 2 m of the
front of the Charging Base.
6
Connect the adapter to the Charging
Base and a wall outlet.
• Make sure the Charging Base is
plugged in, otherwise the RoboVac
will not automatically return to it.
When the Charging Base connects to
AC power, the LED indicator on it is
steady white.
Using Your RoboVac
Important Tips Before Use
A B
C
Remove power cords and small objects from the floor that may
entangle RoboVac.
Fold tasseled edges of rugs underneath to prevent tangling RoboVac.
Avoid cleaning dark-colored high-pile rugs or rugs thicker than 1.02
in / 26 mm as they may cause RoboVac to malfunction.
It is strongly recommended to place physical barriers in front of
fireplaces and certain areas (i.e. air vents) that may cause damage to
RoboVac if entered.
Loading ...
Loading ...
Loading ...