Loading ...
Loading ...
Loading ...
12
ENGLISH
Problem Cause Solution
The safety switch is
triggered and the
appliance suddenly
stopped or suddenly
restarts during the
processing.
The front panel knob is
loose.
Make sure the front panel is securely
assembled.
Excessive ingredients in
the pasta maker.
The maximum amount of our used
for each batch is 500 g/17.6 oz. If more
than 500 g/17.6 oz is added, reduce
the amount of our before next batch.
During processing,
the appliance stops
working when you
open the lid.
For safety reasons, the
appliance always stops
working when the
lid is opened during
processing.
If you need to resume the previous
operation, close the lid properly, and
press the Start/pause button.
During processing, the
appliance stops. There
is no alarm sound or
ashes.
The pasta maker has
overheated due to long
continuous working
time.
Disconnect from the power source,
and allow the pasta maker to cool
down. To better protect the lifetime of
the appliance, the continuous working
time should be less than 45 minutes.
You can restart using the appliance
after 15 minutes of rest.
Small amount of water
is leaking out from the
appliance.
Water is added before
the program starts.
Follow the user manual instructions
to add water right after the program
starts.
E1 displays on the
screen.
The shaping disc is not
attached.
Attach the disc holder to the main
unit, attach the shaping disc properly
and x the front panel properly to the
device.
The lid is not in place or
not properly attached.
Attach the lid properly.
The appliance stops
during processing, E2
displays on the screen,
the indicators are
ashing quickly, and
the alarm sounds.
The mixing paddle may
be blocked by some
foreign objects.
Disconnect from the power source,
clean the pasta maker, and follow the
user manual again to restart the pasta
making.
The dough may be too
dry.
The wrong program is
selected.
EEE displays on the
screen.
The appliance
malfunctions.
Contact the service center.
Loading ...
Loading ...
Loading ...