Loading ...
Loading ...
Loading ...
7
1. Turn on the Bluetooth using the volume knob. You will hear it make a boot up sound.
Below is the legend for the what the different LED light signals mean:
•Nolight–Bluetoothisofforitisinsleepmodeandcannotconnect
•Blinkinglight–Pairingmode
•Solidlight–Deviceisconnected
2. Press the pairing button and the blue LED will blink. Bluetooth will enter sleep mode after 90 seconds if idle and unpaired.
3. If discoverable during pairing mode, choose ‘Anchor Audio’ from selection list on your mobile device.
4. When the device has successfully connected to the Bluetooth, the Bluetooth module will beep to signify connection and the blue LED
will become solid.
5. Now you can play audio from your Bluetooth device to the Anchor Audio portable sound system. You can adjust volume by using the
Bluetooth module’s knob, as well as the volume control on your device.
OPERATING THE BLUETOOTH
PAIRING BUTTON
INDICATOR LIGHT
VOLUME/POWER KNOB
PAIRING
VOLUME
FREQUENTLY ASKED QUESTIONS
What is the range of Anchor Audio Bluetooth?
The Anchor Audio Bluetooth range is 100 ft. line of sight.
My Sound System is auto-connecting to a device, but I don’t know which one. Can I disconnect directly from the Sound System?
Yes, if your unit is auto-connecting to a device that you cannot identify (because for example, you’re in a room with other people who have connected to the
unit in the past), you may need to manually disconnect that pair from the Sound System itself. Just hold the ‘pairing’ button for two seconds, and the Sound
System will disconnect from the device it is currently connected to, and immediately go into pairing mode.
What kind of modes can my phone be in that allow the Bluetooth connection to still work?
Bluetooth will work in modes such as Airplane mode and Do Not Disturb (or the equivalent). Just be sure to still have your Bluetooth setting turned on.
To simplify the process, put your phone in the desired mode first, and then secure the Bluetooth connection, as moving into these modes may cause
disconnection.
What happens if I get a phone call?
Incoming and outgoing calls should pause the audio stream. The audio from the call should not be transmitted via Bluetooth. To avoid interrupting audio, set
device in Airplane mode, then enable Bluetooth, ensure your connected, and you will not encounter any interruptions in your audio stream.
*Bluetooth connection and behavior may depend on your individual device settings and capabilities, all testing was done using an Apple iPhone.
NOTE: If a previously paired device is in range and discoverable, the unit should automatically make a connection, however, this may depend on your individual device. All
Anchor Audio portable sound system Bluetooth connections are named ‘Anchor Audio’. If you are using multiple systems, be sure to keep track of each connection.
Loading ...
Loading ...
Loading ...