Loading ...
Loading ...
Loading ...
3
BASIC SYSTEM OPERATION
1. Unfold Beacon Line Array
2. Securely attach the metal latches
3. Set all Input Levels to minimum & Tone Controls to flat
(middle)
setting
4. Plug wired microphone into the MIC 1 or MIC 2 jacks and/or any audio source into the LINE-IN jacks
5. Switch Power to ON - Power On LED will light
6. Slowly increase Level Controls for active Input Jacks to desired volume
7. Adjust Tone Controls for desired sound quality
BEACON 2
AIR WIRELESS COMPANION TRANSMITTER
ANCHORLINK DUAL WIRELESS MIC RECEIVERS
POWER CORD INLET
BLUETOOTH
NOTE: Make all connections with shielded cables to avoid hum, buzzing, and interference.
ACTIVE BATTERY GAUGE
POWER SWITCH
BEA2-XU4
WIRED MIC VOLUME CONTROLS
UNIVERSAL WIRED MIC INPUTS
•BALANCED XLR
•BALANCED 1/4”
TONE CONTROLS
BALANCED 1/4” LINE OUTPUT
Depending on your purchase, your unit may include an AIR
Wireless Receiver or Transmitter, CD/MP3 combo player, or
nothing
LINE LEVEL VOLUME CONTROL
LINE INPUTS
•UNBALANCED 1/4”
•STEREO 3.5 MM (1/8”)
Depending on your purchase, your unit may include zero, one, or
two dual wireless mic receivers
EXT
ANT
AIR COMPANION TRANSMITTER
TX
SETUP DOWN
CHANNEL SELECTION
1. Hold “SET” for 2 seconds
2. Press “UP” or “DOWN” to change channel
3. Press “SET” once to set channel
1. Press “POWER” once to turn ON
2. Hold “POWER” for 2 sec to turn OFF
CHANNEL
To pair your Bluetooth enabled device, see the instructions on page 7.
To pair or unpair your AnchorLink wireless microphone or belt pack, see the instructions on page 8.
To operate the Anchor AIR, see the instructions on page 10.
Loading ...
Loading ...
Loading ...