Loading ...
Loading ...
Loading ...
– 13 –
8. ASSEMBLY
8.4 ATTACHING THE HIGH
PRESSURE HOSE – FIGS.9 – 10
− To connect the high pressure hose(10)to the
trigger assembly (12), push-t the hose
connector into the inlet on the assembly.
• Disconnection of the hose is achieved by
pressing the hose release button (2).
− Insert the other end of the hose (10) into the
high pressure outlet (13)and screw the
shrouded end of the hose onto the threaded
outer section of the pressure outlet, taking care
not to cross the threads.
8.5 CONNECTING THE WATER
SUPPLY – FIGS.11 – 12
− Screw the supplied water inlet adaptor (6) to
the water inlet connection (6.1) taking care not
to cross the threads.
− To connect the pressure washer to the water
supply, a push t hose connector will be
required (FIG.12). Ensure the connector is
correctly tted to the hose and that a ‘click’ is
heard when attaching to the machine.
Note: The supply must be between 1.5bar and
6.0bar and 7 litres/min.
Note: Max. water temp: 40°C.
Note: Always observe local bye-laws and
regulations.
9
10
FIG.
FIG.
11
12
FIG.
FIG.
(2)
(10)
(13)
(6.1)(6)
(12)
(10)
Loading ...
Loading ...
Loading ...