Loading ...
Loading ...
Loading ...
EN - 8 WWW.SENIXTOOLS.COM
addition, check for alignment
of moving parts, binding
of moving parts, breakage
of parts and any other
conditions that may affect
the tool's operation.
14. Never leave tool unattended
while it is running – Turn
the power OFF by removing
the battery from the unit.
Do not leave the saw until
the cutting bar comes to a
complete stop.
15. Do not grasp the exposed
cutting blade or cutting
edges when picking up or
holding the saw – Be sure to
encase the cutting bar in its
protective sheath when not
in use.
16. Disconnect tool – Turn
off the power switch and
remove the battery when it is
not in use, before servicing,
when transporting or when
changing the chain or other
accessories.
17. Stay alert – Watch what you
are doing. Use common
sense. Do not operate the
pole chain saw when you
are tired.
18. Store idle tool indoors –
When not in use, appliances
in moving parts. Use of
heavy-duty rubber gloves,
substantial non-skid
footware and close-tting
clothing is recommended
when working outdoors with
power tools.
9. Wear protective hair
coverings to contain long hair.
10. Always wear safety glasses
and ear defenders to provide
eye and ear protection –
Everyday eyeglasses only
have impact resistant lenses
and do not provide the same
protection as safety glasses.
11. Wear face or dust masks
– If the cutting operation
is dusty, the use of a face
or dust mask specially
designed to lter out
miscoscopic particles is
recommended.
12. Use recommended
accessories – Consult
the owner’s manual for
recommended accessories.
The use of improper
accessories may cause risk
of injury.
13. Check for damaged parts
– Before each use, repair
or replace any guard or
part that is damaged. In
Loading ...
Loading ...
Loading ...