Loading ...
Loading ...
Loading ...
6 7
Before use, please read this user manual carefully and be familiar with all the
operation and precautions.
Reading the User Manual
Take your MixPro to explore the underwater world now.
3
4
Start
Power on
Press and hold the left start
button for 3 seconds. The
product will be on after the
indicator light turns on
Item
Instructions
RemarksPhoto
Stop
operating
(standby)
Release the left and right start
buttons at the same time, or
release a start button on
either side to stop operating
Speed
switch
1. Press the left and right start
buttons at the same time to
run the product
2. Quickly tap on the right
button twice and then hold it
Operating
With the product turned on,
press the left and right start
buttons at the same time to
operate it
Enters standby mode,
and LED indicator
flashes
The twice tap interval
is about 0.5s.
Switch between high
and low speed.
The start speed is
“low” by default.
LED indicator is
always on
Turn the safety lock to the
position of lock sign
Lock
Power off
The product will
automatically shut down
without any operation in 10
minutes
LED lights turn off
Operation
1
Operation Instructions
Before use, you should be familiar with product performance in an absolutely
safe water environment and fully master its operations.
If you don’t use or carry the product, it is recommended that lock and keep it safe, to
prevent from accidentally operating due to squeezing the start button, causing personal
injury or damage to the product.
3s
2 press
Right Start Button
Safety Lock Button
Left Start Button
Loading ...
Loading ...
Loading ...