Loading ...
Loading ...
Loading ...
14 15
GAS ORIFICE AND PILOT SPUD CONVERSION
NATURAL GAS (NG) – LIQUID PROPANE GAS (LPG)
ONLY USE THE COMPONENTS AND
PARTS SUPPLIED WITH THE CONVERSION KIT
WARNING: The following conversion should be performed by authorized
professionals when the oven is completely cold. Improper installation,
adjustment, alteration can cause property damage or injury.
See next page for proper spud and orce component numbers
1 - GAS KIT DISASSEMBLY
Remove the gas kit
according to the
instructions in the
appropriate section of
the manual.
2 REPLACEMENT OF THE
MAIN GAS NOZZLE
Unscrew the xing screw
(a) and remove the plate (b)
covering the nozzle. Unfasten
the main nozzle (e) to the
holder screw (d) by using an
11 mm spanner. Replace the
nozzle with orice supplied
in the
kit and screw it back to the
holder (d). During these
operations, secure lock the
nozzle holder (d) to keep it
from rotating.
d
e
a
b
continue next page >>
3.1 REPLACEMENT OF THE PILOT
SPUD
Unscrew the xing screw (h) of the
pilot light tube..
3.2
Remove the tube (i) from the seat.
3.3
Remove the pilot nozzle ( j) from the
cone-like support (o) and replace
it with the spare component
supplied in the kit.
Reassemble everything following the
same steps in reverse order.
h
i
o
Following the conversion, apply the new label on the product and
check that the size of the nozzle corresponds to that shown on the label.
Loading ...
Loading ...
Loading ...