Loading ...
Loading ...
Loading ...
7
Setting the temperature
To modify the temperature set point, turn the dial clockwise to
increase and anticlockwise to decrease the temperature.
Temperature settings available are 5°C, and 10°C through to 28
°C. Setting to 5°C turns the unit to the antifrost function. (see
Antifrost function at page 6).
Selected power levels and working power levels
There are 3 power levels (min/med/max) as well as ECO mode.
min
med max max + eco
Depending on the selected power level, the working power level
may be less or equal to the selected power level.
The working heating power is always shown by the unit’s display
by means of the thin bars below the selected power level.
]
]
- If the current room temperature is much lower than the
selected temperature, the appliance will start to heat the
room as rapidly as possible at the selected power level.
- If the current room temperature is close to the selected
temperature, the appliance will heat the room using a
heating power lower than the selected power level.
- When the selected temperature is reached, the unit stops
heating.
Example: Operation is started at room temperature 18°C, the set
temperature is 25 °C, and the selected power level is Max.
Example of display:
Room temperature 18°
Working power level: Max
Working power level: Min
Room temperature 24° Room temperature 25°
The room temperature is
reached the appliance
stops heating
Room temperature 22°
Working power level: Med
❶
❸
❷
❹
Setting the power level
1. Press the dial twice during heating operation.
2. The power level will blink.
3.
Choose one of the available power levels by turning the dial.
4. Press the dial once to conrm.
Example of display:
❶
❸
❷
❹
Eco mode
When the eco mode is activated, the unit will automatically se-
lect the most convenient working power level from Max to Min,
and will also control the set temperature in order to achieve en-
ergy saving while guaranteeing optimum comfort.
Anti-frost function
This function is useful to prevent freezing.
To activate this function, in manual operation when temperature
is set to 10°C turn the dial anticlockwise till the set point 5 is
displayed and a will appear.
In this operation mode the working power can not be set.
The appliance will automatically set to Max power level.
If you turn the dial clockwise, you will restore the same power
setting as before being switched to anti-frost.
Selected power level
Working power level
Loading ...
Loading ...
Loading ...