Loading ...
Loading ...
Loading ...
6
7
DESCRIPTION
A ON/STAND-BY button
B timer button
C control dial/dial button
D display
E wheel
F cord holder
Symbols shown on the unit's display
key-lock
power supply
temperature/clock
selected power levels
working power levels
Anti-frost symbol
timer function
l (green) Temperature 1 (T1) indicator
l (red) Temperature 2 (T2) indicator
FIRST USE
"Easy wheel" system
Turn the radiator upside down on a rug or a soft surface in order
to prevent damaging the paint nish.
Fully unfold the wheels by turning them outwards (Fig. 1). Turn
the radiator back to its upright position.
Important! Wait a minute before turning on the
machine so the oil returns to the normal level.
The radiator must never and for any reason be overturned
when it is in operation.
Location
The heater must not be placed immediately below a power out-
let. Do not use this radiator in rooms having a surface area of less
than 43 square feet (4 sq.m.).
Power connection
Before using the appliance check that your supply voltage is
the same of that shown on the rating label of the unit and that
the power socket and power supply line correspond to the load
specied. After plugged in the appliance will shows the
symbol in red colour.
Setting the time
When using for the rst time or after it has been unplugged for a
long time, you need to set the current time:
1. Plug the appliance into the mains. The display will show
00 blinking.
2. Turn the control dial to select the current hour.
3. When the correct hour is set, press the dial and the min-
utes digits will blink.
4. Turn the control dial to set the minutes then press the dial
to conrm.
Example of display:
❶
❸
❷
❹
Changing the time
If you need to reset the time, in manual operation mode press the
control dial for 5 seconds, then proceed as explained above. After
setting the clock, the unit will return in manual operation mode.
MANUAL OPERATION MODE
Turn the appliance on pressing the button .
The unit will start operating in manual operation mode with the
following default settings:
Fig. 1
Loading ...
Loading ...
Loading ...