Loading ...
Loading ...
Loading ...
1. Enter the Alarm Mode.
l
Navigating Between Modes
2. Use (D) to scroll through the alarm ([AL1]
to [AL5]) and hourly time signal ([SIG])
screens until the one you want to turn off
is displayed.
Alarm or hourly time signal
3. Press (A) to turn off the displayed alarm or
the hourly time signal.
●
Each press of (A) toggles between ON
and OFF.
●
Turning off all alarms will cause [ALM]
(alarm) to disappear from the display,
while disabling the hourly time signal
causes [SIG] (hourly time signal) to
disappear from the display.
4. Hold down (C) for at least four seconds to
return to the Timekeeping Mode.
Note
●
If [ALM] (alarm) is still displayed, it
means that another alarm is still turned
on. To turn off all of the alarms, repeat
steps 2 and 3 until the [ALM] (alarm)
indicator is no longer displayed.
Alarm Countdown Display
In the Timekeeping Mode, the watch will
display a countdown to the next upcoming
alarm when there are 60 or fewer minutes
remaining until its alarm time.
Alarm Countdown
Note
●
Pressing (A) switches to the day of the
week display. The alarm countdown
will return to the display after about two
seconds.
●
If an alarm comes to within 60 minutes
before its time is reached while the
countdown of another alarm is
displayed, the remaining countdown of
the second alarm will start when the
end of the previous countdown is
reached.
Hand Home Position
Adjustment
Strong magnetism or impact can cause the
time indicated by the analog hands to become
different from the time on the digital display. If
this happens, adjust hand alignment.
Adjusting Hand Alignment
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Hold down (A) for at least five seconds.
Release the button when [H.SET] appears
on the display.
This causes the hour and minute hands to
move to 12 o’clock, and [0:00] to flash on
the display.
After five seconds
Hour hand
Minute hand
After two seconds
3. If the hour hand and minute hand are not
at 12 o’clock, use (B) and (D) to align them.
Note
●
The hour hand moves in accordance
with minute hand movement. Your
button operations control movement of
the minute hand only.
4. Press (A) to complete the setting
operation.
Watch Operation Guide 5550
13
Loading ...
Loading ...
Loading ...