Loading ...
Loading ...
Loading ...
10
Water Hardness & setting the salt
The water softener must be set manually, using the water hardness dial. The water softener
is designed to remove minerals and salts from the water, which would have a detrimental or
adverse effect on the operation of the appliance. The higher the content of these minerals
and salts, the harder your water is. The softener should be adjusted according to the
hardness of the water in your area. Your local Water Authority can advise you on the hardness
of the water in your area.
Adjusting Salt Consumption
The dishwasher is designed to allow for adjustment in the amount of salt consumed based on
the hardness of the water used. This is intended to optimise and customise the level o f salt
consumption.
“/” No salt needed
“-” Setting toward the “-” sign
“+” Setting toward the “+” sign
“-” or “+” Setting toward between the “-”
sign and the “+” sign
British measurement = Clarke
Please follow the steps below for adjustment in salt
consumption.
1. Unscrew the cap fr0m the salt container, inside the unit. Anti
clockwise and remove to reveal the picture on the left.
2. There is a ring on the container with an arrow on it (see
figure on the side), if necessary, rotate the ring in the
anticlockwise direction from the "-" Setting toward the "+" sign,
based on the hardness of the water being used. This controls
the amount of salt that will be used
It is recommended that adjustments should be made in
accordance with the following scheme:
For Customer Services & Spare Parts please call 0345 209 7461
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit
us at www.productcareuk.com
Loading ...
Loading ...
Loading ...