Tripp Lite BP240V65L Owner's Manual

Loading ...

7.1 Battery Cabinet Specications

(DC Nominal Voltage: ± 120V DC, 240V DC)

Battery Pack BP240V65 (-NIB) BP240V100 (-NIB) BP240V65L (-NIB) BP240V100L (-NIB)

Dimension

W×D×H

31.5 x 35.4 x 47.2 in.

(800 x 900 x 1200 mm)

31.5 x 43.3 x 63 in.

(800 x 1100 x 1600 mm)

Weight 608 lb. (275.8 kg)* 930 lb. (421.8 kg)* 1083 lb. (491.2 kg)* 1637 lb. (742.5 kg)*

Breaker 1x 250A 1x 600A

Fuse 2x 400A 4x 400A

*Models with the –NIB sux do not include internal batteries, so their total weight varies based on batteries installed by the end user.

7. Specications

Storage

The battery cabinet must be stored in a clean, secure environment with a temperature less than 104°F (40°C) and a

relative humidity less than 90% (non-condensing). Store the battery cabinet in its original shipping container if possible.

Charge the batteries for at least 24 hours prior to use. Do not rely on the battery cabinet to provide backup power to

connected equipment until the batteries are fully charged.

Note:IftheUPSsystemremainsoforanextendedperiodoftime,itshouldbeturnedonperiodicallytoallowthebatteriestorecharge.

The UPS system should be turned on and the batteries should be recharged at least one uninterrupted 24-hour period every 3 months.

Failure to recharge the batteries periodically may cause irreversible battery damage.

8. Storage

Service

Your product is covered by the warranty described in this manual. A variety of Extended Warranty and On-Site Service Programs are

also available. For more information on service, visit Tripplite.Eaton.com/support. Before returning your product for service, follow

these steps:

1. Review the installation and operation procedures in this manual to ensure that the service problem does not originate from a

misreading of the instructions.

2. If the problem continues, do not contact or return the product to the dealer. Instead, visit Tripplite.Eaton.com/support.

3. If the problem requires service, visit Tripplite.Eaton.com/support/rma-request. From here you can request a Returned

Material Authorization (RMA) number, which is required for service. This simple on-line form will ask for your unit’s model and

serial numbers, along with other general purchaser information. The RMA number, along with shipping instructions will be

emailed to you. Any damages (direct, indirect, special or consequential) to the product incurred during shipment to Eaton or an

authorized service center are not covered under warranty. Products shipped to Eaton or an authorized service center must have

transportation charges prepaid. Mark the RMA number on the outside of the package. If the product is within its warranty period,

enclose a copy of your sales receipt. Return the product for service using an insured carrier to the address given to you when you

request the RMA.

9. Service and Warranty

Loading ...

Tripp Lite BP240V65L series ±120VDC External Battery Cabinet