Loading ...
Loading ...
Loading ...
There are 2 procedures to stop the motor.
• Release the power trigger to stop the motor.
• Push the machine stop button on the power pack.
Refer to the operator's manual for the power pack.
Lamp indicators in the product
Indication Cause Step
1 green lamp flashes. The product is connected to a power pack and is pre-
pared for operation.
The power output is less than 70% of the maximum
available output in operation.
N/A
2 green lamps flash. The power output is 70-90 % of the maximum available
output in operation.
N/A
3 green lamps flash. The cutting speed is at its best performance.
The power output is 90 % of the maximum available out-
put in operation.
N/A
3 green and 1 yellow
lamps flash.
The power output drops. Decrease the load.
3 green, 1 yellow and
1 red lamps flash.
The product is too hot. Decrease the load or increase
the water flow or airflow to de-
crease the temperature.
All the status indica-
tion lamps flash.
The product is too hot. Decrease the load or increase
the water flow or airflow to de-
crease the temperature.
The power is decreased. Increase the water flow or airflow
to decrease the temperature.
The system is in automatic shutdown. Put the power pack in a location
with lower temperature.
Replace the air filter.
24 1635 - 003 - 20.08.2021
Loading ...
Loading ...
Loading ...