Loading ...
Loading ...
Loading ...
42
III. Maintenance
The appliance must be maintained in accordance with the instruction manual and labels
provided. Consult with your local Hoshizaki Certied Service Representative about
maintenance service.
WARNING
• Only qualied service technicians should service the appliance.
• To reduce the risk of electric shock, do not touch the icemaker power switch or
control switch with damp hands.
• Before Servicing: Move the icemaker's power switch to the "OFF" position. Turn off
the power supply. Place the disconnect (if applicable) in the off position.
Lockout/Tagout to prevent the power supply from being turned back on
inadvertently.
• CHOKING HAZARD: Ensure all components, fasteners, and thumbscrews are
securely in place after any maintenance is done to the appliance. Make sure that
none have fallen into the dispenser unit/ice storage bin.
Fig. 18
Spout
Chute
Packing and Nylon Ring
Chute Insulation
Extruding
Head
Evaporator
Assembly
Reservoir
Float Switch
Rubber O-Ring
(FD-650 and Larger)
Nylon Ring
(FD-650 and Larger)
Evaporator
Condensate
Drain Pan
Infrared Sensor Lens
Evaporator Packing
(F-450 Only)
Spout-to-Chute Packing
Spout-to-Chute Bracket
Spout-to-Chute Strap
Reservoir Hose
Overow Hose
Reservoir
Cover
Model Shown: F-1002MAJ-C
Cutter
Spout
Thumbscrews
Wing Nuts
Baffles
Bin Control Assembly Mount
Actuator
Proximity Switch (mechanical bin control)
Plate
Spout-to-Chute Strap
Shaft
Loading ...
Loading ...
Loading ...