DRAPER 98503 D20 20V Ash Vacuum Cleaner (Sold Bare)

User Manual - Page 17

For 98503.

PDF File Manual, 20 pages, Read Online | Download pdf file

98503 photo
Loading ...
Loading ...
Loading ...
– 17 –
10. MAINTENANCE
FIG. 12
Clean the lter by shaking to dislodge and
dispose of any ash (FIG. 12).
Note: Replacement lters are available - see
drapertools.com.
Note: Do not leave the lter to dry in direct
sunlight.
10.2 CARE AND STORAGE
1. When not in use, turn off using the switch on top of the ash can, then disconnect and
remove the 20V Li-ion battery.
2. Do not change lters, or carry out any cleaning or servicing, without rst disconnecting
the ash can from the power supply.
4. Keep the external surfaces clean. Avoid impact damage & do not allow the ash can to come
into contact with abrasive or corrosive materials.
5. Do not use solvents, thinners or alcohol to clean the ash can, as these chemicals will damage
the nish. With the ash can disconnected from the power supply, use a dry cloth to wipe over
the casing.
6. When not in use the ash can should be stored in a secure, dry place, out of the reach of
children. DO NOT leave it exposed to the elements and avoid direct sunlight, direct heat,
rain/moisture etc.
7. Only use parts and accessories recommended in this manual. The use of unauthorised
accessories or attachments is not permitted and may result in personal injury or damage
to the ash can.
8. Do not attempt to repair or modify the ash can. Do not attempt any electrical repair yourself.
Consult a qualied electrician.
10.3 BATTERY REMOVAL AND DISPOSAL
NOTE: This product uses Lithium lon rechargeable and recyclable batteries. When the batteries
no longer hold a charge, they should be removed fron the Vac and recycled. They must not be
incinerated or composted.
To remove the battery pack for disposal:
1. First, before attempting to disassemble the product, turn it on and leave it on until the
motor completely stops insuring a complete discharge of the batteries.
2. Using a phillips screwdriver, remove the seven screws securing the two housing halves.
3. Lift the housing cover away from the assembly.
4. Detach all lead connections from battery pack. Remove battery pack and dispose of as
per recommended guidelines.
Loading ...
Loading ...
Loading ...