Loading ...
The POWER-STATION+ from Circuit Specialists features a large LCD display
which allows for dynamic display of the system performance. The setting is clear at
a glance. The powerful hot air system combines with a 75 watt soldering iron which
also includes a smoke absorbing feature. Controlled by a SAMSUNG SCM &
PID program, the POWER-STATION + can achieve real-time tracking and rapid
temperature recovery providing temperature stability within a fluctuation range of
+/- 1 deg C at the components heating elements Fast heat up time and auto shut
down features make this one of our top performing hot air rework systems.
Basic Features:
1. Individual Power Switch for Hot Air, Soldering Iron and Soldering Iron
smoke absorber
2. SAMSUNG SCM & PID program enables this unit to achieve real-time
tracking and correction of air gun and soldering iron temperature
3. Fahrenheit/Celsius display switchable
4. Large Liquid Crystal Display
5. Fast heat up.
6. Manual/Automatic mode may be set for operating the air gun
7. Auto Sleep function applies to the soldering iron & may be set from 0 to 99
minutes
8. Vacuum operated component pick up tool may be selected & used instead of
the smoke filter
Basic Instructions
• Attach the side mount hot air gun holder
• Power up the unit with the main power switch located on the back of the unit
• Apply the appropriate power switch on the front panel (hot
air/soldering/smoke absorber) You may apply 1, 2 or all three
• The Hot Air and Soldering Iron Temperature setting up/down buttons are on
the right hand side of the front panel. Use these buttons to set your desired
temperature in Celsius or Fahrenheit
• Set your air speed using the rotary knob libeled “air”
• Attach the soldering iron to the 6 pin connector at the lower right hand corner
of the front panel
• Attach the smoke absorber tubing to the vacuum nozzle next to the solder
iron connector. Make sure there are not any kinks in the air line.
• If desired, install the vacuum powered component pick up wand instead of
the air filter
Loading ...
Loading ...