Loading ...
Loading ...
Loading ...
14
Digital Anemometer
Operation Manual
Operating guidance
your required (CMS, CMM, CFM).
4.9 Temperature unit selection
Long press the “UNIT” key for 3 seconds to switch
temperature unit (°C , °F ).
4.10 Temperature mode selection
Long press the “HOLD/MODE” key for 3 seconds to
switch temperature mode (ambient temperature, dew point
temperature and wet bulb temperature).
4.11 USB real time data uploading
Long press the “ /USB” key for 3 seconds to enable
or disable USB real time data uploading function.
Detailed steps are shown as follows:
1．Use CD to install the PC software and the USB drivers.
2．Power on the meter and connect it to a computer with
USB cable.
3．Launch the PC software.
4．Long press the “ /USB” key for 3 seconds to enable the
USB function of the meter.
5．The PC software displays data and diagrams.
6．Save or print data.
Loading ...
Loading ...