Loading ...
Loading ...
Loading ...
13
Digital Anemometer
Operation Manual
Operating guidance
①．Press “FUN” key to make “AREA” display on the
screen.
②．Use the “MAX/MIN” and “UNIT” keys to adjust value
and unit, after adjusting area unit (m², ft²), then press
“MAX/MIN” key. There should be an audible buzz,
indicating that area input is completed and settings are
saved.
③．To change the area setting, please repeat the step ②.
4.7 Air volume measurement
Place the detector (fan) into the test environment. Use
the “FUN” key to set the meter to the Air volume
measurement mode; the "FLOW" symbol should display on
the screen.
Measurement is done with the fan surface perpendicular
to the wind direction.
Note:
1. If the detector (fan) is not aligned in the wind direction,
the measurement can be skewed.
2. For steady wind, the detector (fan) will get maximum
reading when it is aiming at the wind direction.
4.8 Air volume unit selection
When using the meter to measure air volume, you can
press the “UNIT” key to select the measurement unit
Loading ...
Loading ...
Loading ...