Loading ...
Loading ...
Loading ...
Hantek 6052BE/6082BE
Source: You can use the trigger source options to select the signal that the oscilloscope
uses as a trigger. The source can be any signal connected to a channel BNC, or to the
EXT. BNC.
CH1: Select CH1 as trigger signal
CH2: Select CH2 as trigger signal
ALT: Select CH1 and CH2 as trigger signal
EXT.: Select EXT. as trigger signal
EXT./10: Select attenuated EXT./10 as trigger signal (Only Hantek6082BE)
Slope: Set the slope to Rising (+) or Falling (-).
Rising: Trigger on rising edge
Falling: Trigger on falling edge
50%: Sets the trigger level to the center of the waveform amplitude.
The user can also change the trigger setting on trigger panel in sidebar.
USER’S MANUAL 42
Loading ...
Loading ...
Loading ...