Loading ...
Loading ...
Loading ...
13
ADJUSTMENTS GUIDE
MOVING THE RECUMBENT BIKE
Lift the Rear Stabilizer (No. 3) and
tilt the
recumbent bike until the Transportation Wheels
(No. 49)
touch the ground. Now you can transport
the recumbent bike to the desired location with
ease.
ADJUSTING THE BALANCE
In order to achieve a smooth and comfortable ride, you
must ensure that the recumbent bike
is stabled and
secured. If you notice that the recumbent bike is
unbalanced during use, you should adjust the 4
Adjustable End Caps (No. 44) located on the Front
and Rear stabilizers (No. 2&3)
until the recumbent
bike becomes levelled with the floor surface.
ADJUSTING THE TENSION
Adjust the tension by rotating the Tension Control
Knob (No. 96) clockwise
to increase the level of
resistance. Rotate the Tension Control Knob (No.
96) counter-clockwise
to decrease the level of
resistance.
Tension levels are set at Leve
l 1 being the lowest
and Level 12 being the highest.
ADJUSTING THE SEAT
To adjust the
seat forward or backward, press
down Brake Handle (No. 30), then slide the seat to
the desired position, lift the Brake Handle (No. 30)
to tighten.
CLEANING
The recumbent bike can be cleaned with a soft, clean,
damp cloth. Do not use abrasives or
solvents on plastic parts. Please wipe your perspiration off the recumbent bike after each use. Be
careful not to get excessive moisture on the computer display panel as this might cause electrical
hazard or electronics to fail.
Please keep the recumbent bike, especially the computer, out of direct
sunlight to prevent screen damage.
Please inspect all assembly bolts and pedals on the recumbent
bike for proper tightness every week.
STORAGE
Store the recumbent bike in a clean and dry environment, away from children.
Loading ...
Loading ...
Loading ...