HeatWave HW2012-1600BKIT 160 Sqft Electric Floor Heating System with Required GFCI Programmable Thermostat 240V

User Manual - Page 6

For HW2012-1600BKIT.

PDF File Manual, 32 pages, Read Online | Download pdf file

HW2012-1600BKIT photo
Loading ...
Loading ...
Loading ...
HEATIZON.COM
6
Important Safeguards and Warnings
WARNING: Shock and fire hazard
If the Heatwave® System is damaged or not installed properly, fire or shock could occur
resulting in serious personal injuries or damage to property. Carefully follow the warnings and
instructions contained in this manual.
It is important that this equipment is installed only by qualified persons who are familiar with
the proper sizing, installation, construction and operation of floor warming systems and the
hazards involved.
The installation must comply with all national and local electrical codes. Consult the authority
in the jurisdiction familiar with these requirements, either the NEC (National Electric Code),
CSA (Canadian Standard Assocation) should there be any questions.
The Heatwave® System is designed for under floor heating purposes only. Be sure that the
floor is not penetrated by nails, screws, or similar devices that can cause damage during and
after installation or during subsequent or future floor work.
If the Heatwave® System is damaged, it must be replaced or repaired. To repair or to splice
any part of the system, use only Heatizon Heatwave® Repair Kit (part number HWRPKIT).
1. General Guidelines
1.1 Use of the Manual
This manual describes the Heatwave® Mat and Cable floor heating system — how to design
the room, select the product, and install the system. It is important to thoroughly review this
manual and the Thermostat Installation and Operation Manual prior to installation:
For additional information regarding any aspect of the Heatwave® System, contact:
Heatizon Systems
4137 South 500 West
Murray, UT 84123 USA
Tel: 888-239-1232
Tel: 801-293-1232
Fax: 801-293-3077
heatizon.com
1.2 Safety Guidelines
The safety and reliability of any floor heating system depends on proper design, installation,
and testing. Incorrect installation or mishandling of the product can cause damage to the
heating cable, system components and property, and can create a risk of fire or shock. The
guidelines and instructions contained in this guide are important. Follow them carefully to
minimize these risks and to ensure that the Heatwave® System performs as designed.
Pay special attention to the following:
• Instructions Marked: • Safety Warnings:
NOTE:
Loading ...
Loading ...
Loading ...