Loading ...
Loading ...
Loading ...
9
MAINTENANCE
WARNING: VERIFY THAT THE POWER PLUG IS DISCONNECTED FROM THE SOCKET.
Regularly clean the lter. The lter is re-usable and should be cleaned regularly.
NOTICE: Clean or change the lter regularly for best performance. If the machine is used without the
lter, the motor will burn out and the warranty will be voided. Always keep spare lters on hand.
NOTICE: The lters included are made of high-quality materials designed to stop small dust particles.
A dry lter is necessary to pick up dust. If the lter is wet, it will clog quickly and be very dicult to
clean. Handle the lter carefully when removing it for cleaning and replacing it. Check the lters for
tears or small holes. A small hole can let dust pass through and out of the lter. Do not use a lter with
holes or tears; replace it immediately.
1. Verify that the plug is disconnected from the power outlet.
2. Press the release button and remove the container (Fig. 1).
3. Remove the lter and lter holder from the container, then clean any loose dust o the lter (Fig. 2).
4. Empty all debris and any dust from the container (Fig. 3).
5. Use a mild soap and water solution to wash the lter and rinse with clean water (Fig. 4).
6. Allow the wet lter to air dry for 24 hours before tting into the container. For optimal performance,
a new lter is recommended.
7. Make sure the container and lter are clean and dry before using it again. DO NOT immerse the
vacuum in water (Fig. 5).
8. Ret the lter and lter holder into the container (Fig. 6).
9. Ret the container onto the vacuum. Make sure the container clicks into place (Fig. 7).
CLEANING
1 2
4 5
6 7
3
Loading ...
Loading ...
Loading ...