Ancona AN1575 30 Inch Black Stainless Steel Convertible Chimney Style Wall Mount Hood

User Manual - Page 16

For AN1575.

PDF File Manual, 20 pages, Read Online | Download pdf file

AN1575 photo
Loading ...
Loading ...
Loading ...
— 16 —
Operation
Troubleshooting
Problem Possible Cause
If the range hood or LED light
does not operate after installation:
Check if the range hood has been plugged in, make sure that all power
has been turned back ON, fused not blown and all electrical wiring are
properly connected.
The range hood vibrates when the
blower is on:
The range hood might not have been secured properly on to the ceiling or
wall.
The blower or fan seems weak: Checkthattheductsizedusedisatleast6in.(15.3cm)or31/4×10in.
(8.3 × 25.4 cm). Range hood WILL NOT function efciently with insufcient
ductsize.Forexample:7in.(17.7cm)ductover6in.(15.3cm)holeand
loosely secured.
Checkifductiscloggedorifdamperunit(half-circularange)isnot
installed correctly or opening properly. A tight mesh on a side wall cap unit
mightalsocauserestrictiontotheairow.
The lights work but the fan is not
spinning at all, is stuck or is rattling:
The fan might be jammed or scraping the bottom due to shipping damage.
Please contact us immediately.
The hood is not venting out
properly:
Make sure the distance between the stove top and the bottom of the hood
is within 24 in. and 30 in. (61 and 76.2 cm) in distance.
Reduce the number of elbows and length of duct work. Check if all joints
are properly connected, sealed, and taped.
Power settings
u
Press the button once and the motor starts to
operate at Low speed.
v
Press the button again and the motor will
reach Medium speed.
w
Press the button once more and the motor will
reach High speed
x
Press the button to lower speeds in
succession until the motor stops working (power off).
Lights
u
Press the light button to turn LED lights on and
off.
Timer Function
The control module provides the option to run the motor for
a predetermined time period in order to evacuate remaining
vapors from the kitchen.
u
Press the button while the motor is running.
The motor will shut off automatically after 15 minutes.
While timer is activated, press button second /
third / fourth time and it will delay 30 / 45 / 60 minutes
subsequently. Total delay time is 60 minutes.
v
While the motor is running, press and to
increase and decrease the number of delay minutes.
w
Press button fth time and timer will be
deactivated.
15 minute delay
LightOff /
Slow down
On /
Speed Up
LCD
Loading ...
Loading ...
Loading ...