Ancona AN1575 User Manual

Loading ...

— 13 —

STEP 11

Connect Ductwork

• Attach ductwork to damper. Secure the ductwork with duct tape to make sure joints are secure and air- tight.

• Donotinstalltheducttapetootightlyasthismaypreventthedamperapsfromopeningwhichwilloverworkthemotor

and cause improper functioning of the unit.

• Fasten all connections with sheet metal screws and tape all joints with certied aluminum or foil tape. Use caulking to

seal exterior wall or roof opening around the cap.

Figure #1

Figure #2

STEP 10

Mount Range Hood onto Wall

• Hang the range hood on the hooks of the lower mounting bracket (see Figure #3).

• Screw the range hood to the wall.

CAUTION - Make certain the range hood is secure before releasing!

Installation

STEP 12

Install Chimney

• Place chimney on top of the main housing.

• Remove the protective coating from the upper chimney. Carefully slide the upper chimney down into the lower chimney.

• Use two screws to x the two chimneys together with the lower chimney bracket, make sure upper chimney is moving

freely (see Figure #4).

• Screw the upper chimney to the upper mounting bracket with two screws (see Figure #5).

Figure #4 Figure #5

Figure #3

Upper Chimney Bracket

Loading ...

Ancona AN1575 30 Inch Black Stainless Steel Convertible Chimney Style Wall Mount Hood