Loading ...
Loading ...
Loading ...
— 15 —
Installation
STEP 14
Install Filters
To install lters for the following three steps (see Figure #6):
• Angle the lter into slots at the left side of the hood.
• Push the button on handle of the lter.
• Release the handle once the lter ts into a resting position.
Cleaning Filters
IMPORTANT: Drain oil from spacers, lters, oil tunnels, oil containers before oil and residue overow!
• Remove all spacers, lters, grease tray, and oil containers and discard oil and residue.
• Wash with warm soapy water. NOTE: Stainless steel lters, spacers and oil tunnel are top rack dishwasher safe.
• Dry thoroughly before replacing and follow directions for installation in reverse.
• Filters should be cleaned after every 30 hours of use.
• Should lters wear out due to age and prolonged use, replace with a new lter.
Figure #6
Maintenance
STEP 15
Install Easy Clean Panel
• Remove the screws and nuts in place, and use them to x easy clean
panel (see Figure #7).
• Push panel into a resting position.
Figure #7 Figure #8
Loading ...
Loading ...
Loading ...