Jump-N-Carry JNC8550 JNC8500. JNC8800 Operator's Manual

Loading ...

Performance

Performance of your Jump-N-Carrywilldependuponseveralfactors:

• Agood,solidconnectionbetweentheJump-N-Carry clamps and the battery

andgroundconnectionsareamust.Movingtheclampsbackandforthwhile

connecting to the battery will help create a better connection.

• Cleanconnectionsbetweenyourvehicleorequipmentbatteryanditsterminals

are very important. For an optimal connection, corrosion (soft grayish-white build-

up) on battery terminals must be removed. With the ignition turned off, disconnect

the battery cables and clean the terminals and battery posts with a baking soda

solution.

9b.PRESSRESERVEPOWER–thedisabledvehicle’sstateofchargeisnothigh

enoughtousetochargetheultracapcitor.PressRESERVEPOWERandthe

unit will count up as the ultracapacitor is charged to full from the internal lithium

batteryandtheGreenREADYLEDislit.Theunitwillsoundanaudiblebeep

indicating it is ready to jump start. The jump starter function is engaged for 30

seconds, after which the unit will return to idle mode.

9c. Nolightslit/novehiclevoltageshown–thedisabledvehicle’sbatteryisso

discharged that the jump starter cannot recognize it and sense the vehicle’s

polarity (<1.5VDC). Check all connections and ensure proper polarity of your unit

tovehiclecable/clampconnects.PressJUMPSTARTtoactivatetheunit.Press

RESERVEPOWERtochargetheultracapacitor.Afterultracapacitorreaches

100%,pressandholdtheJUMPSTARTbuttonfor3seconds.Greenready

LEDwillflashfor10seconds.Thejumpstarterfunctionwillthenengagefor30

seconds, after which the unit will return to idle mode.

10. Start the vehicle (turn on the vehicle ignition).

Note: If the vehicle doesn’t start within 6 seconds, let the Jump-N-Carry cool for

3 minutes before attempting to start the vehicle again or you may damage

the Jump-N-Carry.

11.Whenthevehicleisstarted,pressJUMPSTARTtoturntheunitOFF.

12. Disconnect the negative (–) battery clamp from the vehicle frame/ground.

13. Then, disconnect the positive (+) clamp.

14.Alwaysrewrapcablesandproperlystoreclampswhentheunitisnotinuse.

Loading ...

Jump-N-Carry JNC8550 12V Capacitor Jump Starter