Jump-N-Carry JNC8550 JNC8500. JNC8800 Operator's Manual

Loading ...

4.Chargeuntilthewallchargerindicateschargecomplete.

Note:The unit can remain connected to the wall charger indefinitely without adverse

consequences.

Directly charging the ultracapacitor for immediate use.

Note: We refer to this method as “for immediate use” because ultracapacitors, while

very powerful, do not hold a charge for more than a few days. This method

should only be used to charge the unit when it will be used to jump start very

soon after charging the ultracapacitor.

1. Connect the pin jack end of the supplied 12V cable to the Jump-N-Carry via the

12VCAPCITORCHARGEPORTinthecontrolpanel.

2.Connectthe12VMalePulgendofthe12Vcabletoa12Vpowerport.

3.Chargingprogressisindicatedbythe%READYTOJUMPdisplayontherightof

the control panel.

4.Chargeuntil%READYTOJUMPdisplayindicated100%stateofcharge.

Jump Starting Instructions

Note: The unit is designed to be used as a jump starter only when the ultracapacitor is

above 80% ready to jump as indicated on the control panel.

1. Use in a well ventilated area.

2. Shield eyes. Always wear protective eyewear when working near batteries.

3. Review this instruction manual and the instruction/safety manual provided by the

manufacturer of the vehicle being jump started.

4.Turnignitionoffbeforemakingcableconnections.

5. Stay clear of batteries while jump starting.

6. Clamp the positive (red +) clamp to the positive terminal on the vehicle battery (for

negative ground system), or an alternate vehicle starting point as recommended by

vehicle manufacturer.

7.Clampthenegative(black–)clamptothevehicleground(non-movingmetalpart,

such as the vehicle frame).

8.Makesurethecablesarenotinthepathofmovingengineparts(belts,fans,etc.).

9.Whenconnectionismade,theVEHICLEVOLTAGEdisplayonthecontrolpanelwill

display the disabled vehicle’s state of charge and the unit will indicate the next step

totake:

9a.PRESSJUMPSTART–thedisabledvehicle’sstateofchargeishighenoughto

usetochargetheultracapcitor.PressJUMPSTARTandtheunitwillcountup

as the ultracapacitor is charged to full from the disable vehicle’s battery and the

GreenREADYLEDislit.Theunitwillsoundanaudiblebeepindicatingitisready

to jump start. The jump starter function is engaged for 30 seconds after which the

unit will return to idle mode.

Loading ...

Jump-N-Carry JNC8550 12V Capacitor Jump Starter