Loading ...
Loading ...
Loading ...
DRIVING PROCEDURES
NEW OPERATOR DRIVING PROCEDURES
1. Wear protective riding gear. See the Safe Riding Gear section.
2. Perform the pre-ride inspection.
3. Place the transmission
in PARK.
4. Lock the brake holding
latch.
5. Mount the vehicle from
the left side.
6. Sit upright with both
feet on the footrests
and both hands on the
handlebars.
7. Start the engine and
allow it to warm up.
8. Shift the transmission into gear.
9. Check your surroundings and determine your path of travel.
10.Release the brake holding latch.
11. Slowly depress the throttle with your right thumb and begin driving.
12.Drive slowly. Practice maneuvering and using the throttle and brakes on level
surfaces.
DRIVING WITH A PASSENGER
1. Never carry more than one passenger on a 2-up ATV.
2. Do not carry a passenger on a 2-up ATV until you have at least two hours of
driving experience with the vehicle.
3. Never allow anyone under 12 years of age to ride as a passenger on a 2-up
ATV. Make sure any passenger is tall enough to comfortably and safely
reach the grab handles and footrests.
4. Make sure the passenger is wearing appropriate riding gear, including an
approved helmet with a rigid chin guard.
5. Perform the pre-ride inspection.
6. Lock the parking brake.
95
OPERATION
Loading ...
Loading ...
Loading ...