Loading ...
Loading ...
54
PREPARING TEA OR COFFEE
1. Place the tea or ground coffee into the filter basket according to the amount of water
that has been filled.
2. Place the filter cover onto the filter basket. Turn the filter cover clockwise, until the filter
cover latch fits into the notches on the filter basket.
3. Place the casing lid onto the beverage container. The arrow must be pointing toward
the marking OPEN.
4. To close the lid, press it down while turning in the CLOSE direction.
5. Set the selection switch to the correct position.
SETTING THE BEVERAGE SELECTION SWITCH
Each individual switch position is setting different temperatures. Mulled wine and some
teas require only warming and should not be boiled. For other teas or coffees, the water
must boil to facilitate brewing.
1. To prepare mulled wine, set the selection switch to the symbol of the glass.
2. To prepare coffee or tea, set the selection switch to the symbol of the cup.
SWITCHING ON THE APPLIANCE
1. Plug the power cord into an AC receptacle.
2. Set the ON/OFF switch to “I”, the indicator lamp lights up.
3. When the mulled wine is hot enough, or when the brewing process for coffee or tea
has been completed, the heating function is automatically and audibly switched off.
The temperaturemaintenance function is automatically switched on. The green
indicator lamp will illuminate.
4. The beverage is ready for pouring.
Note: Werecommend that you do not keep heated beverages warm for more than
2hours.
POURING BEVERAGES
1. Place a cup under the tap, turn the tap in the direction of DISPENSE.
2. Set the tap back to STOP.
REMOVING AND REPLACING THE BEVERAGE CONTAINER
1. Set the on/offswitch to “O”.
2. Press the unlocking buttons on both grips, and remove the container from the base
unit.
3. To return the container, set it into place on the base unit with its view panel facing
forward. It must audibly and noticeably lock into place.
REMOVING THE FILTER BASKET
•We recommend that you remove the filter basket and empty it, when the appliance
has switched itself offand the temperaturemaintenance function has been switched
on. Otherwise, the beverage will steep too long and have an overly strong or bitter
flavour.
• Be aware that the filter basket is not able to filter as finely as a normal tea or coffee
filter. For this reason, some tea or coffee residue may remain in the container.
1. Turn the lid in the OPEN direction and remove it.
2. Hold the handles of the filter cover and remove the entire filter basket.
3. In order to close it, set the lid in place again and turn it in the CLOSE direction.
CLEANING
•Do not submerge the device in water or rinse it with running water.
•Do not use any solvents or abrasive cleaning agents.
•The appliance is not suited for cleaning in a dishwasher.
1. Switch off the appliance and remove the plug from the AC receptacle.
2. Allow it to cool completely before you begin cleaning.
3. Hold down the unlocking buttons on both grips and remove the beverage container
from the base unit.
4. Remove the appliance lid and then the filter cover.
5. Remove the filter basket.
6. Rinse the filter basket and filter cover with warm water, and when necessary with
amild cleaning agent. Rinse with clear water.
7. Clean the inner part of the beverage container carefully with a soft sponge and
clear water. Rinse out with clear water, and let the water pour out through the tap.
8. Wipe the exterior of the beverage container with a soft, dry towel.
9. Remove the drip tray from the appliance and rinse with warm water, and when
necessary with mild cleaning agent.
10. Wipe the drip plate and outer surface of the appliance.
11. Allow all parts to dry completely before putting the appliance away for storage,
and always store the appliance with its lid left open.
TROUBLESHOOTING
PROBLEM
-During the heating process, liquid flows into the drip tray.
POSSIBLE CAUSE
-The tap is set to the DISPENSE position.
SOLUTION
-Move the tap into the CLOSE position.
-Only fill the container up to the max. filling point.
PROBLEM
- Your coffee or tea is not hot.
POSSIBLE CAUSE
-The selection switch is set to the symbol of the glass.
SOLUTION
-Set the selection switch to the symbol of the cup. In this position, the proper
temperature for brewing tea or coffee will be reached. This is higher than the
necessary temperature for preparing mulled wine.
PROBLEM
-The appliance does not function.
POSSIBLE CAUSE
-Plug not connected to AC receptacle?
-Appliance not switched on?
-Beverage container not set correctly in place on the lower part of the appliance?
SOLUTION
-Check to see if the power cord has been plugged in, if the appliance has been
switched on, and if the beverage container has been placed correctly on the base unit.
Loading ...
Loading ...
Loading ...