Loading ...
Loading ...
Loading ...
9 English
Clean the air fi lter.3.
Use vacuum cleaner A) or wash the air fi lter
with water B).
A) Using a vacuum cleaner
(Do not use air of 120°F or
higher.)
B) Washing with water
When the air fi lter is very dirty,
use soft brush and neutral
detergent.
(Do not use water of 120°F or
higher.)
Remove water and dry in the shade.
NOTE
Do not wash the air conditioner with hot water of •
more than 120°F, as doing so may result in dis-
coloration and/or deformation.
Do not expose it to fi re, as doing so may result in •
burning.
Fix the air fi lter.4.
Set the tab of the air fi lter to the hook of the
suction grille, and fi x the air fi lter. (By the meth-
od opposite to removing.)
Shut the suction grille by the method oppo-5.
site to opening.
Press the FILTER SIGN RESET BUTTON on 6.
the remote controller.
The display “
” (TIME TO CLEAN AIR FIL-
TER) vanishes.
HOW TO CLEAN AIR OUTLET AND
OUTSIDE PANELS
Clean with soft cloth•
When it is diffi cult to remove stains, use water or •
neutral detergent.
WARNING
Do not let the indoor unit get wet as it may cause •
an electric shock or fi re.
NOTE
Do not use gasoline, benzene, thinner, polishing •
powder, liquid insecticide. It may cause discolor-
ing or warping.
Do not scrub fi rmly when washing the blade with •
water.
The surface sealing may peel off.
Do not use water or air of 120 • °F or higher for
cleaning air fi lters and outside panels.
HOW TO CLEAN THE SUCTION GRILLE
Fig.7
Clip
Open the suction grille.1.
Refer to “HOW TO CLEAN THE AIR FILTER”.
(Refer to Fig. 5)
Remove the air fi lter.2.
Refer to “HOW TO CLEAN THE AIR FILTER”.
(Refer to Fig. 6)
Detach the suction grille.3.
Pull the clips (×2) on the back of the suction
grille forward. (Refer to Fig. 7)
4. Clean the suction grille.
Wash with a soft bristle brush and
neutral detergent or water, and dry
throughly.
NOTE
Do not wash the suction grille with hot water of •
more than 120°F, as doing so may result in dis-
coloration and/or deformation.
Fix the air fi lter.5.
Refer to “HOW TO CLEAN THE AIR FILTER”.
Attach the suction grille by the method 6.
opposite to removing.
Shut the suction grille by the method oppo-7.
site to opening.
START UP AFTER A LONG STOP
Confi rm the following
Check that the air inlet and outlet are not •
blocked.
Remove any obstacle.
Check if the earth is connected.•
Might there be a broken wire somewhere?
Contact your dealer if there are any problems.
01_EN_3PN07753-11N.indd 901_EN_3PN07753-11N.indd 9 12/19/2008 8:00:32 PM12/19/2008 8:00:32 PM
Loading ...
Loading ...
Loading ...