Loading ...
Loading ...
Loading ...
28 29
3
Open the water inlet cover to fill the water, then close the cover.
Do not use any cleaning solution other than those specified by eufy, as it
may damage the water tank.
4
Install the water tank into the bottom of RoboVac until a click is heard.
The mopping mode is only intended for a clean floor without stubborn
stains. To achieve a better mopping effect, it is recommended to clean the
floor with RoboVac three times before installing the mopping module.
5
Select a cleaning mode to start cleaning.
- RoboVac automatically sweeps and mops in the selected mode.
6
When RoboVac finishes working and returns to the Charging Base, press the
release button to remove the dust collector and the water tank.
7
Remove the water tank and put the dust collector back into the main unit.
After mopping, remove the water tank, empty any remaining water and
clean the mopping cloth to prevent mildew or unpleasant smells. For
how to clean and maintain the water tank, refer to the “Cleaning and
Maintenance” section in this manual.
Loading ...
Loading ...
Loading ...