Loading ...
Loading ...
Loading ...
ENGLISH
10
Fig.E
OPERATION
WARNING: To reduce the risk of serious personal
injury, turn unit off and remove the battery pack
before making any adjustments or removing/
installing attachments or accessories. An
accidental start-up can causeinjury.
Fig.D
13
14
Attaching and Adjusting the Shoulder
Strap (Fig. C)
The pole hedge trimmer comes with an adjustable
shoulderstrap.
1. Snap the shoulder strap latch
17
onto the strap
mount
10
located on the unit, just in front of the on/
off trigger as shown in Figure C. Adjust the strap so it fits
over yourshoulder.
Pivoting the Trimmer Head (Fig. A, D, E, G)
The trimmer head pivots 180° and can be locked into
7 different positions within that range. To avoid being
pinched, do not grab the blades. Wear gloves and hold unit
as shown in FigureG.
WARNING: Before connecting the battery to the unit,
be sure the trimmer head is locked intoposition.
To Pivot the Trimmer Head
1. With one hand firmly gripping the trimmer head,
use the other hand to press the locking button
13
and rotate the trimmer head handle
14
to pivot the
trimmer head as shown in FigureE.
2. Lock the trimmer head into one of the seven operating
positions. To lock the trimmer head into place, release
your grip on the trimmer head handle. Check to make
sure that trimmer head is locked into position by trying
to move the motor housing. If it is not locked, rotate it to
the nearest lockposition.
Fig.C
17
10
Proper Hand Position (Fig. G)
WARNING: To reduce the risk of serious personal
injury, ALWAYS use proper hand position as shown.
WARNING: To reduce the risk of serious personal
injury, ALWAYS hold securely in anticipation of a
suddenreaction.
Installing and Removing the Battery Pack
(Fig. F)
NOTE: For best results, make sure your battery pack is
fullycharged.
To install the battery pack
6
into the tool handle, align the
battery pack with the rails inside the tool’s handle and slide
it into the handle until the battery pack is firmly seated in
the tool and ensure that it does notdisengage.
To remove the battery pack from the tool, press the release
button
7
and firmly pull the battery pack out of the tool
handle. Insert it into the charger as described in the charger
section of thismanual
Fig.F
7
6
Loading ...
Loading ...
Loading ...