Loading ...
Loading ...
Loading ...
COOKTOP USE
Fire Hazard
Turn off all controls when done cooking.
Failure to do so can result in death or fire.
COOKTOP ON Light
The COOKTOP ON indicator light is located on the right-hand
side of the control panel. The light will glow when any surface
control knob is turned on.
The indicator light will go off when all control knobs have been
turned off, even when one or more surface cooking areas are still
hot.
000 00@
0 @ 0 0
The control knobs can be set anywhere between HI and OFR
Push in and turn to setting. The surface cooking area Iocator
shows which element is turned on. Use the following chart as a
guide when setting heat levels.
SETTING RECOMMENDED USE
HI • Start food cooking.
High • Bring liquid to a boil.
Medium High • Hold a rapid boil.
6-8 • Quickly brown or sear food.
Medium • Maintain a slow boil.
5 • Fry or saute foods.
Medium Low • Cook soups, sauces and gravies.
2-4 • Stew or steam food.
LO • Simmer.
Low • Keep food warm.
SURESlMMER TM • For a low simmer or when using
LO lids.
4 • Melt chocolate or butter.
• For a high simmer or when
simmering without lids.
A. COOKTOP ON light
EASYGLANCE TM Hot Surface Indicator Light
The Hot Surface Indicator light is located above the control knob.
Unlike the COOKTOP ON light, the EASYGLANCE TMhot surface
indicator light will glow as long as any surface cooking area is too
hot to touch, even after the surface cooking area(s) is turned off.
A. EASYGLANCE TMHot surface indicator light
REMEMBER: When range is in use or (on some models)
during the Self-Cleaning cycle, the entire cooktop area may
become hot.
NOTE: On self-cleaning ceramic glass models, the cooktop will
not operate when the range is in a self-cleaning mode.
The Cooktop Lockout prevents unintended use of the surface
cooking areas. When the cooktop is locked out, the surface
cooking areas cannot be turned on by the control knobs.
When power is first supplied to the range, or if the range loses
power, the surface cooking areas may be in the Cooktop Lockout
position. The surface cooking areas cannot be activated until
power is restored to the range and (or) the Cooktop Lockout is
disengaged.
To Lock/Unlock Cooktop:
Before using, turn all control knobs to OFF. Press and hold
the TOP keypad for 5 seconds. A single tone will sound, and
i "Loc on" and a cooktop icon will appear on the display. After
5 seconds the clock display will reappear.
Repeat steps above to unlock cooktop. "Loc OFF" will appear on
the display for 5 seconds, and the picture of the cooktop will
disappear from the display.
Loading ...
Loading ...
Loading ...