Loading ...
Loading ...
Loading ...
EN - 12
• Pour clean water into the tank (5) up to the
“MAX” level to carry out the rinse cycle, then
press the button (18) to start the rinse
cycle, the button (18) ashes and the
LED (25) lights up steadily for the entire
duration of the washing cycle.
• The rinse cycle ends when the keys light up
white.
If, at the end of the descaling
process, the LED (25) remains
permanently lit, it indicates that
a new descaling cycle must be
carried out since the quantity
of descaling solution that was
used was insufcient for complete
cleaning.
Personal injury hazard.
• The descaler contains acids that
can irritate the skin and eyes.
• Follow the manufacturer's
instructions and safety warnings
on the packet scrupulously in
the event of contact with skin or
eyes.
• Use descaler products
recommended by Smeg to
prevent damage to the coffee
machine.
Any other servicing should be
performed by an authorized
service representative.
“Empty system” procedure
The ‘Empty system’ procedure is recommended
before long periods of non-use and before
consulting a maintenance manager.
• Activate the procedure by holding down
the key (16) and the key (19)
simultaneously for three seconds, the key
(17) and the key (19) ash
simultaneously.
• The entire quantity of water in the tank is
drained through the coffee circuit and the
steam spout.
• The pump continues to operate, even
intermittently, to also empty the internal
water circuits.
• At the end of the procedure the machine
switches off.
The empty system procedure takes
several minutes and on-off cycles.
Do not turn off the machine until the
complete procedure is complete.
Cleaning and maintenance
Loading ...
Loading ...
Loading ...