Loading ...
Loading ...
Loading ...
EN - 7
EN
Use
Steam delivery
• Enter the “Orange” dispensing program.
• Make sure that the tray (14) is correctly
assembled.
• Press the button (19) which starts
ashing. Wait until the button is steady lit
and the buzzer sounds to indicate that the
correct steam dispensing temperature has
been reached (19) .
• Position a container under the steam wand
(30) with approx. 100 grams of milk
for every cappuccino to be prepared.
Introduce the steam wand under the surface
of the milk (approx. 1 cm).
• Press the key (19) to start the supply
of steam and tilt the container slightly, while
trying to move as little as possible away
from the surface to avoid creating bubbles
that are too large. Proceed until the desired
level of froth is obtained.
At the end of the operation, clean the
steam wand (30) immediately using
a damp cloth.
The result of the steam function can
be inuenced by the ingredients
used.
For best results, we recommend
using cold skim or whole milk (about
5°C).
To avoid obtaining a little frothed
milk, or with big bubbles, always
clean the cappuccino cleaner
as described in the paragraph
“Cleaning and maintenance
”.
• The maximum continuous steam delivery
time is two minutes, if you want to stop the
delivery before the automatic stop, press
the button (19) again.
• After the automatic stop, steam delivery can
be restarted by pressing the button (19)
.
• After heating the milk, clean the inside of
the steam wand by dispensing steam for a
few seconds, making sure that the tray (14)
is xed to the machine.
During steam delivery and after
delivery, the steam wand (30) is
hot; danger of scalding.
• Clean the steam wand every time you use
it, to avoid milk residues or clogging.
For a complete cleaning of the steam
wand see paragraph “Cleaning and
maintenance”.
• A manual rinse cycle is recommended at
the end of each use of the steam function.
Customization of the quantity
It is possible to customize, for each type of dispensing,
the quantity of coffee or water dispensed
.
• Place a cup or large cup under the
dispenser.
• Press for at least 3 seconds one of the
keys relative to the drink to be dispensed.
The selected key lights up ashing; the
machine emits a double sound to signal
the modication of the preset program.
• On reaching the desired quantity, stop
dispensing by pressing the key again; an
acoustic signal indicates the memorization
of the quantity.
Any customization of the drinks
remains saved for future dispensing.
Loading ...
Loading ...
Loading ...