Loading ...
Loading ...
Loading ...
JET
9
3. Steady sander with one hand. Push down on
idle pulley assembly and turn 1/8 of a full turn
clockwise to lock in place. See Figure 6.
4. Remove old belt. Install new belt.
5. Rotate idle pulley assembly counter-
clockwise to engage tension.
Figure 6: JAT-752
Shoe replacement
The shoe or sanding platen should be replaced
when, due to wear, it no longer sits flat but is
convex in shape.
JAT-750/752:
1. Disconnect sander from air source.
2. Remove belt (see Belt replacement).
3. Remove screw(s) and remove old shoe
(Figure 7).
4. Install new shoe and fasten with screw(s).
Make sure tab on shoe end engages slot on
sander arm.
JAT-751:
1. Disconnect sander from air source.
2. Remove belt (see Belt replacement).
3. Loosen hex socket cap screw (Figure 7).
4. Remove old shoe. Replace with new shoe.
5. Tighten screw and install belt.
Figure 7
Idle pulley replacement
Disconnect sander from air
hose before making any repair or adjustment.
Follow Figure 8 for your sander model when
replacing the idle pulley.
Figure 8
Loading ...
Loading ...
Loading ...