Loading ...
Loading ...
Loading ...
8
not set humidity value and fan speed.
In sleeping mode, when the water tank is full, the machine will not alarm, but the water tank full
indicator light will be on (red color) to remind that the water tank is full and you need to empty the
water tank.
Press and hold the sleep mode button for 3s to reset the air filter. When the machine works for
600 hours, the air filter indicator light will be on to remind you to clean the air filter, and the
machine will not work until you clean the air filter and press the button to reset the air filter.
Timer Button
Press the timer button to active the timer function and then press the “increase and decrease”
button to set the time. Each time you press this button, the value increases by 1 hour, and the
value "88" is displayed on the display.
In the running state, use the timer function to "turn off the machine regularly".
In the standby state, use the timer function to "turn on the machine regularly".
Whatever the state is, the timer indicator lights up when the timer is set..
Set the time to "00" to cancel the timing function.
Fan Speed Button
Press this button to switch the fan speed between high and low fan speed cycle, and the
corresponding indicator light will be on . The fan speed can be adjusted only in the auto mode.
Increase Button
Press this button to set humidity and timing time;
For humidity adjusting, press one time to add 5% humidity value, the humidity adjusting follows
the order as below: 30% - 35% - 40% - 45% - 50% - 55% - 60% - 65% - 70% - 75% - 80% -
30% cycle.
For timing, press one time to add 1 hour timing value, the timing follows the order as below:
00-01-02-03-04-05-06-07-08-09-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-00 cycle.
Decrease Button
Loading ...
Loading ...
Loading ...