Loading ...
Loading ...
Loading ...
7
6.3 SETTINGS
Stand By Button
In the standby state, press the power button to turn on, the operation indicator lights up and the
default fan speed is high, and the default humidity setting is 50%. In the power-on state, press
the power button to turn off, the running indicator light goes off and the compressor stops
immediately, and then the fan shuts down after 30 seconds delay.
Mode Button
Press the mode button to switch between Auto and Continuously dehumidify modes.
Auto mode - Continuously dehumidify mode cycle, press once to switch the mode from one to
another, the corresponding indicator will light up.
●Auto mode: When environmental humidity ≥ set humidity +3%, the fan starts working and
the compressor starts working after 3 seconds. When environmental humidity ≤ set humidity
-3%, the compressor stops working and the fan stops working after 30 seconds delay.
Both fan speed and humidity can be adjusted in the auto mode.
●Continuously dehumidify mode: In this mode, the machine will continue to run at high fan
speed, the default humidity setting is 20%, and both the fan speed and the humidity setting can
not be adjusted.
Sleep/Reset Button
Press the sleep button, the indicator lights up and the sleep mode function activates; touch the
button again to close the function.
In sleep mode, the fan speed will be switched to low fan speed automatically, and after no
operation for 10 seconds, except sleeping mode indicator light, the power indicator light, water
tank full indicator light and child lock indicator light, the other indicator lights and display screen
will be off.
When room humidity ≤ 57%RH，the compressor will stop working and the fan will stop working
30 seconds later.
When room humidity ≥ 63%RH，the fan will start working and compressor will start working 3
seconds later.
The fan speed setting function and humidity setting function is ineffective in this mode, you can
Loading ...
Loading ...
Loading ...